heres the link to dragtimes...

http://www.dragtimes.com/Pontiac-Bonnev ... 24808.html

heres the slip...

http://www.dragtimes.com/2003-Pontiac-B ... 24808.html

New PB a month or so ago at Pittsburg raceway.

12.96@111.9 and then a 12.83@110.9 with my best 60' of a 2.09...

Same circumstances as my last post. Stock heads/gen3. Full weight, full tire pressure all season tires. No prep at all. But I did have the 2.8" on at 22* of timing.

The slip pic is on ...

or u can just make a hood like mine and have no problems with the 3" core. i have a ZZP stage 3. plenty of room

tinting tail lights looks good IMO but it will get u pulled over. not worth it to me. been there, done that.

ok, i got the bung in. and thanks to "viper" the formula. once i hook this up, it will be a new tuning experiance for me. im used to the narrowband tuning: reseting and turning fuel trim learn off, taking a long drive while keeping the throttle smooth and in each cell for a good amount of time(up to ...

so no i dont need to do anything diff to hook it up. just look for the power and stioch number to be where E85 is suppossed to be?

... and thanks man. dont know wut else to do untill i get money for a N* and MAF. then maaaaybe a Gen V. but theyre too expensive still. plus im still waiting on my ...

awsome! thanks for the help... does it matter that im running E85?

hey guys. goin to a mod meet tomorrow and i have the LC-1 and Aeroforce. LC-1 has analog outputs and the Aeroforce has analog inputs. i was wondering if anyone could help me with the formula to use so i can plug the LC-1 into the Aeroforce because i plan to watch AFR and KR all the time. does anyone ...

yea no trac or abs light. just the stablility every once in a great while. my speed sensor and wheel bearings are good. its prolly cuz i put the updated ISS(intermediate steering shaft) in. the update was SLIGHTLY longer then the old one. and now sometimes when im turning slowly i can hear it ...

sweet. so i wasted $50 today. went to the dealer for them to pull the service stability code, which of course i havent seen in a week. get there and he pulls a C1287 and C1288, which are steering position sensor codes that were stored.

soo i was curious. turned the key "on", waited for the pump ...

i got all my parts from NAPA. and i always get the most expensive "top brand" part. they just came in a paired NAPA box and said made in the USA. i remember hearing that Monroe makes NAPA's shocks. idk tho.

im just gonna find someone with a Tech 2 or better scanner and save the hassle. if it tells ...

and now i intermittently get the "service stability system" message in the DIC. how do i check this out? HP Tuner didnt help.

no it does not. at least not that i notice. still rides and drives fine. but i havent actually held up a yard stick to watch exactly if it moves. any ideas???

hey guys. well i finally took care of my cars issues when i got my new tires so i could get a nice dead on alignment.
so i replaced my front driver side wheel bearing, both front sway bar links, and the rear air shocks. got the best brand of everything from NAPA.

so heres a little explaning b4 my ...

Um, I'm not sure where you're getting that from that ceramic doesn't stop better. Ceramic stops WAY better than the stock semi-metallic pads on my dad's GXP, and the Kevlar/Ceramic EBC Red Stuff pads on my SSEi haul it down way better than stock.

EBC doesn't make drilled rotors for our cars at ...

ok, im gettin close to getting this all together for spring. so im liking and leaning more toward the aeroforce now. since i already have 2 gauges in my car(boost and fuel pressure). only have room for 1 more(the middle top vent).

so if i got the Aeroforce, what would i need to get to monitor my ...

i have drilled and slotted rotors on my Bonny. have had them on for 3 yrs now and i did get them off ebay. then got ceramic pads from autzone. im actually due for brakes soon. this spring i will be getting EBC just drilled rotors. i dont like the slots. the brake dust collects in the slots and fills ...

slickbonny, your emissions testing must just be hooking up the scanner and making sure the PCM is passing all of its self checks. The O2 sim will tell your PCM that everything is great. They obviously don't do a visual inspection.

yea i will admit, they are pretty dumb out here at Echeck. i made ...

just a few things to add...

1. ive had no cat on my car for 3 yrs now. and i DO have emissions tesing. and i DID pass with NO cat. and ive had my car at many shops(for new tires and to get balances and exhaust custom bent, other work is done by me) and no ones had a problem. maybe a few mentioned ...

hmm im a little confused here...

y do i need the Aeroforce if i have HP Tuner for scanning?

if i did get the LC-1, id prolly get it in the kit with the XD-16 gauge. r u suggesting to get the LC-1 cable and use the Aeroforce as the gauge?

i guess it would be nice to see maybe AFR and KR on the ...