Yea I had someone look at the latch while I pulled on the hood release and nothing moved. I'll have to try and find one then!

I have acquired a 04 Lincoln town car and noticed first that the hood lock striker was broken. The arm that you lift up to release the hood just moves back and forth without moving the latch. So that needs to be replaced. But then I noticed that when pulling the hood release on the inside of the car ...

Hey guys, I have been looking at the newer body style grand prix's to get since I don't have a car anymore and I wanted to get feedback from you guys.

I was wondering what are some common issues with these cars? Are there anything serious? With my bonnie I had the worst luck in the world with it ...

Andrew, yea you can see the rotor snapped in half and the rim is all cracked..don't know how that all happened but it did

We both still have massive head and neck pain. I deal with the pain, probably not the best because my neck will hurt or head and I just ignore it which may cause more problems, but she tries and not to move as much as possible. Were just so thankful each day were alive, espically me since I wasn't ...

Pictures:

http://i131.photobucket.com/albums/p299/EWC88/003.jpg

http://i131.photobucket.com/albums/p299/EWC88/002.jpg

http://i131.photobucket.com/albums/p299/EWC88/001.jpg

http://i131.photobucket.com/albums/p299/EWC88/009.jpg

http://i131.photobucket.com/albums/p299/EWC88/017.jpg ...

I was tapped in the back rear of my bumper by a incoming car...that got me to move a little but when he hit me I was like "omg!" and when I said that I moved my hand that was on the wheel which caused me to shoot to the left side of the highway on dirt...I tried to control it but I lost control and ...

Hey guys, I haven't been on here for awhile, been busy with school, life, etc. Well everything has been fine till yesterday came. Yesterday I was driving home in the morning with my girlfriend and at 6am we got into a bad car accident. My car is totaled for sure, there is no doubt about it. We ended ...

I also came up with a list on things that I know off the top of my head that is wrong with the car that makes me wondering if I should get rid of it.

-Rear shocks need replacement
-Find leak
-A/C doesn't work (I don't know if its my controls not letting it work because the one side got fried ...

Heres a crappy cell phone pic of were exactly the water is running down in the car when I talk about the leak.

The water runs right were that quarter is

http://i131.photobucket.com/albums/p299/EWC88/006.jpg


Also the fuel filter replacement, I have never replaced it since I own the car unless a ...

No I have nothing to scan the car. Only option would be to go to Autozone and have them scan it.

For leaks, I don't have a moon roof, and I have replaced the weather guard behind the door panel. I can try the weather stripping. It is leaking on both sides and you see it running down the side, it ...

Its no really a sound the engine is making its what its doing. Once in awhile, more now then normally, I would hit the gas to move (doesn't matter if I go to punch it or just cruise slow) it'll move then stop almost like it ran outn of gas then kick back in and move.


Also I know the carpet is as ...

Not just those minor things as well, engine is acting fun that I have no idea why it is.

So this time I had enough with the bonnie and I am getting rid of it. But the condition it is in is not so great. I will need to first put all the carpets back in since I took them out do to a leak issue that I can not find, my gas guage is messing up, and my headlinear is horrible! Basically the ...

Anyone know were the oil filter is located on this car? Also what kind of oil it takes? Doing it for this girl I know and she has no info on it so I have no idea. Car has 185000 on it, any recommendations on brand of oil? Thanks guys!

Just check the add and its with Mobil 1 synthetic and Mobil 1 EP synthetic.

Brining back a old thread because I will be honest I was busy at the time I posted and then I competely forgot.

Here are the pics of the clip that won't work. I can push it in with some force but it'll pop right back out.

Also you will notice the coating on the metal is wearing off it.

http ...

Are you talkikng about this? http://www.autogeek.net/lexsprayvin.html

Ok thanks. Do you think it be smart to maybe have a hair dryer on hand and use it when sealing it on the door?

What size should I get to use on my door? Or does it not matter? They have 1/4", 5/16" and 3/8"