PontiacBonnevilleClub.com

I went to the track Sunday and met up with some other people from a local car forum. Most everyone was in the 12s except for me and one other guy running a stock Lincoln, who was in the 15s.

I was expecting to not be any quicker then a 14.7 in the Cutlass but to my surprise my first run I ripped off a 14.47 and followed that by two more 14.4x runs. I pulled my engine driven flex fan off for a few runs and hit a best of 14.33 with the other run 14.3x also.

Overall I was very happy with the day, but I can't wait to get my Trick Flow heads on it now. They will be on before the Michigan meet for sure


Here is the only vid of it so far, Chris has one too, but hasn't had time to upload it yet. Hopefully today!
http://www.youtube.com/watch?v=_-wAD6p0rbo





















More random pics

Congrats on the times, the Cutlass is looking and obviously running great. What else do you have planned for it besides the Trick Flow heads.

I want it to be in the 12s by next summer, and hopefully I can get there with the heads and roller rockers I already have and a cam. A shift kit is also being planned as well as eventually a different rear axle.

My Trick Flow heads will support 500 hp as is without any modifications so I know they are up to the job

That looks and SOUNDS amazing! Nice Ryan, very nice!

i had the volume all the way up and it kinda spooked me

seemed a little sluggish off the line but def picked up pretty quick

Lookin' great Ryan.. can't wait to be the car in the other lane..

Awesome... I told you there was more to that cam than just a little bumpity bump

What was your 60 ft?

What pressures were your tires at?

What was your staging RPM?

01bonneSC wrote:What was your 60 ft?

What pressures were your tires at?

What was your staging RPM?

60' was 2.0, tire pressure was 35 psi, staging RPM was around 2 or 3k RPM, can't remember for sure, but it was the highest I could go. When the light went green, I was WOT right away and only broke traction on two runs.

Next time I go to the track.... traction will be an issue