I'll start again monday2000 Bonnie SE stalling issues
-
Bad67bird
- SLE Member
- Posts: 47
- Joined: Wed Apr 13, 2016 12:50 am
- Year and Trim: 2000 Bonneville SE
- Location: Fort Worth ,Texas
Re: 2000 Bonnie SE stalling issues
I'll start again monday
Last edited by Bad67bird on Sun Apr 16, 2017 9:47 am, edited 1 time in total.
1967 Firebird 400 (stock looking but not)
2000 Bonnevile SE (plain)
2004 Grand Prix GT (mildly modded)
2000 Bonnevile SE (plain)
2004 Grand Prix GT (mildly modded)
-
Bad67bird
- SLE Member
- Posts: 47
- Joined: Wed Apr 13, 2016 12:50 am
- Year and Trim: 2000 Bonneville SE
- Location: Fort Worth ,Texas
Re: 2000 Bonnie SE stalling issues
No worries Mike , I've been work in on it awile now......thanx for the well wishes and hope you had a happy weekend as wellMKMike wrote:Bummer.
Well, happy Easter or Passover--or simply have a happy weekend!
1967 Firebird 400 (stock looking but not)
2000 Bonnevile SE (plain)
2004 Grand Prix GT (mildly modded)
2000 Bonnevile SE (plain)
2004 Grand Prix GT (mildly modded)
Re: 2000 Bonnie SE stalling issues
Lol replace your IAC dude u said you saw Improvement go from there and yes there is a wrong way to install TPS lol almost dos it and tired fuel filter?
-
Bad67bird
- SLE Member
- Posts: 47
- Joined: Wed Apr 13, 2016 12:50 am
- Year and Trim: 2000 Bonneville SE
- Location: Fort Worth ,Texas
Re: 2000 Bonnie SE stalling issues
So I got all the codes cleared and took her out on the freeway and opened her up to see what
Would happen........at 90 mph WOT the check engine light came back on and I noticed there was
A roaring sound. The code is p0300 random misfire and now when I accelerate hard , it roars like
An open breather.I'm gonna put a vacuum gage on it the see what's up.my thoughts are A : blown
Intake gasket or B: cracked intake.we all see
Would happen........at 90 mph WOT the check engine light came back on and I noticed there was
A roaring sound. The code is p0300 random misfire and now when I accelerate hard , it roars like
An open breather.I'm gonna put a vacuum gage on it the see what's up.my thoughts are A : blown
Intake gasket or B: cracked intake.we all see
1967 Firebird 400 (stock looking but not)
2000 Bonnevile SE (plain)
2004 Grand Prix GT (mildly modded)
2000 Bonnevile SE (plain)
2004 Grand Prix GT (mildly modded)
-
96 SSEi
- Posts like a Northstar
- Posts: 1813
- Joined: Sun Aug 22, 2010 11:11 pm
- Year and Trim: 2000 Bonniville SSEi L67
- Location: Ontario, Canada
Re: 2000 Bonnie SE stalling issues
just for giggles, unplug the maf and see how she runs
poverty forces one to do unorthodox things
2000 SSEi
past rides:
1996 SSEi
1992 GTP
1987 Grand Am
2000 SSEi
past rides:
1996 SSEi
1992 GTP
1987 Grand Am
-
Bad67bird
- SLE Member
- Posts: 47
- Joined: Wed Apr 13, 2016 12:50 am
- Year and Trim: 2000 Bonneville SE
- Location: Fort Worth ,Texas
Re: 2000 Bonnie SE stalling issues
Lol been down that raod, after two new ones and now an original good one from haro.......no change96 SSEi wrote:just for giggles, unplug the maf and see how she runs
1967 Firebird 400 (stock looking but not)
2000 Bonnevile SE (plain)
2004 Grand Prix GT (mildly modded)
2000 Bonnevile SE (plain)
2004 Grand Prix GT (mildly modded)
-
Bad67bird
- SLE Member
- Posts: 47
- Joined: Wed Apr 13, 2016 12:50 am
- Year and Trim: 2000 Bonneville SE
- Location: Fort Worth ,Texas
Re: 2000 Bonnie SE stalling issues
Ok I finally found the problem, the Delco ignition module that I put on last year
Had a short in it all along. I found this out yesterday when 3 cylinders mysteriously
Died. Well long story short new module on and problem gone.thanx everyone for the help
And Haro for all the parts lol.
Had a short in it all along. I found this out yesterday when 3 cylinders mysteriously
Died. Well long story short new module on and problem gone.thanx everyone for the help
And Haro for all the parts lol.
1967 Firebird 400 (stock looking but not)
2000 Bonnevile SE (plain)
2004 Grand Prix GT (mildly modded)
2000 Bonnevile SE (plain)
2004 Grand Prix GT (mildly modded)
-
MKMike
- Posts like an L67
- Posts: 1305
- Joined: Thu May 01, 2014 9:37 pm
- Year and Trim: 1993 SLE
1998 SE
2001 SSEI
2002 SSEI
Re: 2000 Bonnie SE stalling issues
Did you mean to say DELPHI module?Bad67bird wrote:Ok I finally found the problem, the Delco ignition module that I put on last year
I've had some issues with Delphi aftermarket parts but not ACDelco.
-
Bad67bird
- SLE Member
- Posts: 47
- Joined: Wed Apr 13, 2016 12:50 am
- Year and Trim: 2000 Bonneville SE
- Location: Fort Worth ,Texas
Re: 2000 Bonnie SE stalling issues
No I took Haro advise and ordered an ac delco one to
Prevent problems,but no luck lol
Prevent problems,but no luck lol
1967 Firebird 400 (stock looking but not)
2000 Bonnevile SE (plain)
2004 Grand Prix GT (mildly modded)
2000 Bonnevile SE (plain)
2004 Grand Prix GT (mildly modded)
-
MKMike
- Posts like an L67
- Posts: 1305
- Joined: Thu May 01, 2014 9:37 pm
- Year and Trim: 1993 SLE
1998 SE
2001 SSEI
2002 SSEI
Re: 2000 Bonnie SE stalling issues
Bummer. Hope it was just a defective ICM.
There are things you wouldn't even think of which will cause ICMs to keep failing.
One thing I wouldn't have suspected is excessive AC voltage leaving the alternator.
Worse still, the ICM isn't the only component that can get damaged by this.
Just something to check.
You might read this article to get more ideas on this; article is on page 2 columns 2 and 3:http://www.wellsve.com/sft503/counterp_v7_i2_20031.pdf
There are things you wouldn't even think of which will cause ICMs to keep failing.
One thing I wouldn't have suspected is excessive AC voltage leaving the alternator.
Worse still, the ICM isn't the only component that can get damaged by this.
Just something to check.
You might read this article to get more ideas on this; article is on page 2 columns 2 and 3:http://www.wellsve.com/sft503/counterp_v7_i2_20031.pdf