Vibration at 40MPG and Higher

Discuss your 2000-2005 Bonneville SE, SLE, SSEi, Buick Le Sabre 00-05 and Buick Park Avenue 97-05. Please use General Chat for non-mechanical issues, and Performance and Brainstorming for improvements.
Post Reply
OldCarMan
LE Member
Posts: 5
Joined: Thu Nov 06, 2014 5:53 pm
Year and Trim: 2000 Buick Regal

Vibration at 40MPG and Higher

Post by OldCarMan »

So I have had my 2000 Buick Regal for 5 years now and has 230K.. Car run great however the passenger side will start vibrating starting at 40MPG and higher. When I let off the accelerator, no vibration at 40 and higher.. I have replaced:

Wheel hub
CV axle
Motor mount
Tie rods
Control Arm (including the ball joint)
New tires that have been balanced and rotated.

I have seen this type of problem posted in this Forum however I have not see anyone post the resolution...

Any help will be appreciated.
User avatar
flatlander745
GXP Member
GXP Member
Posts: 293
Joined: Mon Oct 11, 2010 8:11 pm
Year and Trim: 2000 Bonneville SSEi
Location: Poconos, PA

Re: Vibration at 40MPG and Higher

Post by flatlander745 »

So I have had the same vibration issues as many of you out there. Replaced everything, rotated tires, etc. I put new tires on the front and my intermittent intensity shaking at various speeds Is gone!
2000 SSEi Galaxy Silver with New TEP Trans, A 62,000 mile engine out of grandma's car, all new front and rear suspension KYB/ Energy Suspension.
[url][URL=http://s871.photobucket.com/user/flatlander745/media/image-5.jpg.html][IMG]http://i871.photobucket.com/albums/ab278/flatlander745/image-5.jpg[/IMG][/URL][/url]
User avatar
Wes
Posts like a Northstar
Posts like a Northstar
Posts: 2363
Joined: Thu May 22, 2008 8:09 pm
Year and Trim: 2002 Buick Park Ave
Location: Michigan

Re: Vibration at 40MPG and Higher

Post by Wes »

Have you checked the strut mount? What about the subframe bushings?
Image
92 Olds 98. L67, Gen 3 M62, 2.55 pulley, FWI, PLIM, 1.8 YTs.
yourgrandma wrote:High
OldCarMan
LE Member
Posts: 5
Joined: Thu Nov 06, 2014 5:53 pm
Year and Trim: 2000 Buick Regal

Re: Vibration at 40MPG and Higher

Post by OldCarMan »

My plans are to replace the entire strut assembly including the mount (strut needs to be replaced anyway).. Can you point me to what and where to check for the sub frame bushings?

Thanks for the help
User avatar
Wes
Posts like a Northstar
Posts like a Northstar
Posts: 2363
Joined: Thu May 22, 2008 8:09 pm
Year and Trim: 2002 Buick Park Ave
Location: Michigan

Re: Vibration at 40MPG and Higher

Post by Wes »

Here's a good video of someone checking the fronts on a lift. Difficult to do the same way w/o one though.
https://www.youtube.com/watch?v=_NR1ydd1su0

I had a really bad vibration above 60 mph on a 2002 park ave. I replaced/checked many of the same parts you already have. When I was lifting to check for movement in the rear hubs, I noticed an issue. When I went to lift the car by the rear subframe, it lifted a good 4 inches or more before the unibody did. After replacing the bushings, no more vibration.
Image
92 Olds 98. L67, Gen 3 M62, 2.55 pulley, FWI, PLIM, 1.8 YTs.
yourgrandma wrote:High
OldCarMan
LE Member
Posts: 5
Joined: Thu Nov 06, 2014 5:53 pm
Year and Trim: 2000 Buick Regal

Re: Vibration at 40MPG and Higher

Post by OldCarMan »

Thanks for your reply... Will give that a try.. Will post what I find.. May take a few weeks due to holiday...
OldCarMan
LE Member
Posts: 5
Joined: Thu Nov 06, 2014 5:53 pm
Year and Trim: 2000 Buick Regal

Re: Vibration at 40MPG and Higher

Post by OldCarMan »

Finally had a chance to change out the strut assembly... Yes this appears to have corrected the problem.. I still have a slight vibration which maybe that I need to get my tires balanced.. Hopefully I will have a 100% smooth ride once tires are balanced...

Thanks!!
User avatar
Wes
Posts like a Northstar
Posts like a Northstar
Posts: 2363
Joined: Thu May 22, 2008 8:09 pm
Year and Trim: 2002 Buick Park Ave
Location: Michigan

Re: Vibration at 40MPG and Higher

Post by Wes »

Glad to hear. Hope the balance makes for smooth sailing!
Image
92 Olds 98. L67, Gen 3 M62, 2.55 pulley, FWI, PLIM, 1.8 YTs.
yourgrandma wrote:High
User avatar
bobgto65
Posts like an L36
Posts like an L36
Posts: 866
Joined: Thu May 29, 2008 7:52 pm
Year and Trim: 2002 SSEi
2004 Bonneville GXP
Location: Maryland

Re: Vibration at 40MPG and Higher

Post by bobgto65 »

in the H body the cure is often to get the tires balanced with a Hunter Road Force balancer and put the 2 most balanced ones on the front.
bobgto65
Image
2004 Bonneville GXP 62,000 miles purchased 04/13
2009 G8 GXP PBM, M6 9580 miles, no mods, sold 08/15
2009 G8 GT SBM 36,000 miles, modded 430 whp
2002 Bonneville SSEi 203,200 miles (sold 3/2014)
Post Reply