supercharger belt
supercharger belt
I have a 1996 SSEi. Do I have to take the motor mount bracket off to change this belt?! If so what is the best way to attack this? It looks like one of the bolts is behind the power steering pump pulley.
-
MattStrike
- Certified Bonneville Nut
- Posts: 4760
- Joined: Tue Aug 25, 2009 8:32 pm
- Year and Trim: '99 Montana
'04 Dirtymax
'97 Camaro
'92 Trofeo - Location: SE Michigan
Re: supercharger belt
IIRC, no.
Boost addict
The Fleet:
'93 SSEi - Twincharged + manual Build thread
'97 Camaro - Top swap
'05 STS - V8, AWD, her DD
'92 Trofeo - Fair weather DD
'99 Montana - top swap 3800
'04 Sierra 2500HD - LLY Duramax
Current project:
Something cool, trust me.
Upcoming projects:
'92 Bonneville SSE
'87 LeSabre T-type
'67 LeSabre
Gone to greener pastures:
'84 Sierra Classic - Twin turbo 3800
'97 LeSabre - Top swap
RIP:
'86 LeSabre - pictures
'93 SE - L67
The Fleet:
'93 SSEi - Twincharged + manual Build thread
'97 Camaro - Top swap
'05 STS - V8, AWD, her DD
'92 Trofeo - Fair weather DD
'99 Montana - top swap 3800
'04 Sierra 2500HD - LLY Duramax
Current project:
Something cool, trust me.
Upcoming projects:
'92 Bonneville SSE
'87 LeSabre T-type
'67 LeSabre
Gone to greener pastures:
'84 Sierra Classic - Twin turbo 3800
'97 LeSabre - Top swap
RIP:
'86 LeSabre - pictures
'93 SE - L67
-
haro1225
- Posts like a Northstar
- Posts: 1935
- Joined: Thu May 22, 2008 11:38 pm
- Year and Trim: 2004 GTO
- Location: Lincoln Park, Mi
- Contact:
Re: supercharger belt
-Ryan
2004 GTO....LS1, LSA supercharged 525whp, 6MT
96 SSEi...September 2010 COTM........GONE
04 GTP comp G.... December 2015 COTM........GONE
2013 Audi Allroad Quattro
yourgrandma wrote:Hi.
-
Jrs3800
- Retired Admin/Techinfo Admin
- Posts: 26009
- Joined: Mon May 19, 2008 2:08 pm
- Year and Trim: 03 SLE, 95 SE, 95 TS SE
- Location: Space Coast, or at least it used to be
Re: supercharger belt
I You pull the splash shield on the passenger side. you will see an 18mm nut( iirc ), you have to remove that, then there is a stud that uses an E10 Torx Socket( again iirc ), once the stud is removed the space can be removed being careful not to harm the Crank sensor or the wires...
When you reinstall what a lot of them do is grind down an edge on the spacer to make it easier to reinstall...
The mount bracket can stay, but the spacer has to be removed... I recommend using Goodyear Gatorback Belts...
When you reinstall what a lot of them do is grind down an edge on the spacer to make it easier to reinstall...
The mount bracket can stay, but the spacer has to be removed... I recommend using Goodyear Gatorback Belts...