While awating a new weatherstripping for the Bonne, I had not yet put the back seat in.
Well now to the point: I know have found water in passenger right rear well. I immediately pulled up carpet ,saw water from coming same point as was on driver side, went to the frontpassenger side checked out rubber matting under carpet, checked harness that fits into slot of molded robber matting No Wah wah! Checked small drainage groove that runs the length of the car saw where it was wet and where it started to get wet. Got out the talcum powder, sprinkled the door sill closed the door and soaked the passenger RFdoor. Oh I already pulled the RF passenger door. Cannot tell you why but all of a sudden the door that had not leaked since the day it was resealed has now begun to leak. THE PROBLEM: Seems that where the wires come through the deflector shield, to connect to the door moldule, there are two small flaps, and one larger flap on the interior of the shield. I have water running down the internal flap onto the smaller flap, then dripping down the reflector into the car. I maybe an idiot, but I cannot seem to secure the flaps in such a way as to stop the dripping into the car car.
ANY IDEAS??????
