Resetting check engine light
- Blue_Bonne
- SLE Member

- Posts: 35
- Joined: Sun Aug 29, 2010 12:39 am
- Year and Trim: 1994 SE
Resetting check engine light
I had a code which was to change the coolant temp sensor... and thats been changed. How do i get rid of the engine light?

-
00Beast
- Retired Site Developer

- Posts: 20960
- Joined: Tue May 27, 2008 10:30 pm
- Year and Trim: '17 Silverado 1500
- Location: MN/IA
- Contact:
Re: Resetting check engine light
Disconnect the battery and touch the terminals together for 10 seconds and then leave it disconnected for a half hour or so. Otherwise it should clear after a set number of key cycles.
Bye Bye:

RIP sandrock

RIP sandrock
Sirius wrote:Think about it. You’re tooling down the road in your Prius, knowing full-well that this thing being green is as big a sham as federally mandated ethanol-enriched gas, Russia pulling out of Ukraine, and Obamacare.
- Blue_Bonne
- SLE Member

- Posts: 35
- Joined: Sun Aug 29, 2010 12:39 am
- Year and Trim: 1994 SE
-
00Beast
- Retired Site Developer

- Posts: 20960
- Joined: Tue May 27, 2008 10:30 pm
- Year and Trim: '17 Silverado 1500
- Location: MN/IA
- Contact:
Re: Resetting check engine light
Touch the cables together, excuse me. Got about 10 things going on right now, sorry.
Bye Bye:

RIP sandrock

RIP sandrock
Sirius wrote:Think about it. You’re tooling down the road in your Prius, knowing full-well that this thing being green is as big a sham as federally mandated ethanol-enriched gas, Russia pulling out of Ukraine, and Obamacare.
- comatoast
- Posts like an LN3

- Posts: 405
- Joined: Wed Sep 22, 2010 12:14 am
- Year and Trim: 2000 SSEi
- Location: Minnesota
Re: Resetting check engine light
Blue_Bonne wrote:I had a code which was to change the coolant temp sensor... and thats been changed. How do i get rid of the engine light?
Noone local with a obd2 scanner? They can delete it in about 30 seconds.. Just had a "converter flow" code deleted today.. Whatever the F that is

Current mods - FWI, Intense 1.0 PCM, 3.4"- 3.5", Intense MPS, AL 104s, 180 Stat , Intense/TG shiftkit, Aeroforce Interceptor scan gauge
Upcoming mods- 1.9 rockers, 105#springs, Headers, 103s, 3.3, tune..
- Blue_Bonne
- SLE Member

- Posts: 35
- Joined: Sun Aug 29, 2010 12:39 am
- Year and Trim: 1994 SE
Re: Resetting check engine light
but i had them scan it with the obd2 bout it keep sayin error or was it just that scanner... i have a 94 so...comatoast wrote:Blue_Bonne wrote:I had a code which was to change the coolant temp sensor... and thats been changed. How do i get rid of the engine light?
Noone local with a obd2 scanner? They can delete it in about 30 seconds.. Just had a "converter flow" code deleted today.. Whatever the F that is
Last edited by Blue_Bonne on Mon Oct 18, 2010 11:02 pm, edited 1 time in total.

- haro1225
- Posts like a Northstar

- Posts: 1935
- Joined: Thu May 22, 2008 11:38 pm
- Year and Trim: 2004 GTO
- Location: Lincoln Park, Mi
- Contact:
Re: Resetting check engine light
OBD 2 is for anything 1996 and up. I believe the 94 is still OBD 1. It may be OBD 1.5, which is the old style codes with the new style plug.

-Ryan
2004 GTO....LS1, LSA supercharged 525whp, 6MT
96 SSEi...September 2010 COTM........GONE
04 GTP comp G.... December 2015 COTM........GONE
2013 Audi Allroad Quattro
yourgrandma wrote:Hi.
-
00Beast
- Retired Site Developer

- Posts: 20960
- Joined: Tue May 27, 2008 10:30 pm
- Year and Trim: '17 Silverado 1500
- Location: MN/IA
- Contact:
Re: Resetting check engine light
I believe 94 is OBD 1.5. You'll need an OBD 1 scanner with an OBD II cord, in essence. Any shop with a snap-on scanner should be able to do it. AZ won't...
Bye Bye:

RIP sandrock

RIP sandrock
Sirius wrote:Think about it. You’re tooling down the road in your Prius, knowing full-well that this thing being green is as big a sham as federally mandated ethanol-enriched gas, Russia pulling out of Ukraine, and Obamacare.
-
01bonneSC
- Certified Bonneville Nut

- Posts: 4938
- Joined: Sat May 24, 2008 5:18 pm
- Year and Trim: 05 Chevy 'Hoe
1997 'maro (3.8L M5)
89 SkiDoo - Location: Sycamore, IL
Re: Resetting check engine light
What code did you get? Just curious.
If you touch the cables together(while disconected) it pulls any possibly stored voltage in the car.
If you touch the cables together(while disconected) it pulls any possibly stored voltage in the car.
- comatoast
- Posts like an LN3

- Posts: 405
- Joined: Wed Sep 22, 2010 12:14 am
- Year and Trim: 2000 SSEi
- Location: Minnesota
Re: Resetting check engine light
Sorry, forgot it was a 94.. But still He had to have the right connections to see the code anyways.. Weird that he Couldnt/didnt delete it ..
And what code was it?
And what code was it?

Current mods - FWI, Intense 1.0 PCM, 3.4"- 3.5", Intense MPS, AL 104s, 180 Stat , Intense/TG shiftkit, Aeroforce Interceptor scan gauge
Upcoming mods- 1.9 rockers, 105#springs, Headers, 103s, 3.3, tune..


