Ref: 2010 DTS case split re-sealing
Instead of using ready-made molded rubber gaskets for case split, oil pan, and oil pan bed plate, some of the Youtubers are using only RTV to fill in the entire grooves and are claiming GM recommends this.
Was this a 90’s thing and is there any advantage I’m not ...
Search found 273 matches
- Fri Dec 08, 2023 1:04 am
- Forum: General Chat
- Topic: Northstar question
- Replies: 1
- Views: 2059
- Mon Aug 08, 2022 6:36 pm
- Forum: 2000-2005 (other than GXP)
- Topic: How To Repair Door Related Water Leaks.
- Replies: 9
- Views: 9326
Re: How To Repair Door Related Water Leaks.
Just a suggestion for those having trouble getting the brand of Butyl posted
Never used that but I have always had good luck long term with the 3M window weld ribbon sealer. It is usually easy to get locally or on line.
I try to get smaller but have used up to 3/8" dia without problems.
Also had ...
Never used that but I have always had good luck long term with the 3M window weld ribbon sealer. It is usually easy to get locally or on line.
I try to get smaller but have used up to 3/8" dia without problems.
Also had ...
- Mon Jun 28, 2021 1:24 am
- Forum: 2000-2005 (other than GXP)
- Topic: A/C leak question
- Replies: 3
- Views: 976
Re: A/C leak question
^^ X2 ^^
Only leak I had was on compressor body found by UV dye. I believe it was the big O-ring sealing the 2 halves of compressor.
Only leak I had was on compressor body found by UV dye. I believe it was the big O-ring sealing the 2 halves of compressor.
- Thu Dec 24, 2020 9:23 pm
- Forum: 2000-2005 (other than GXP)
- Topic: HVAC Blower intermittent and noisy
- Replies: 13
- Views: 1142
Re: HVAC Blower intermittent and noisy
Some of my old posts may be of help also.
topic46325
topic42051
In my case I got lucky and my original blower motor is still going after all these years and 325k miles.
Just needed to clean out debris and lubricate.
I had a new motor on hand just in case and returned after verifying old one ...
topic46325
topic42051
In my case I got lucky and my original blower motor is still going after all these years and 325k miles.
Just needed to clean out debris and lubricate.
I had a new motor on hand just in case and returned after verifying old one ...
- Sat Nov 14, 2020 9:50 pm
- Forum: Performance & Brainstorming
- Topic: C4 Corvette wheeks fit on a '05 Bonneville?
- Replies: 3
- Views: 1528
Re: C4 Corvette wheeks fit on a '05 Bonneville?
The bolt pattern is different too.
Bonneville = 115mm
Corvette = 120.7mm
Bonneville = 115mm
Corvette = 120.7mm
- Sat Nov 14, 2020 9:41 pm
- Forum: General Chat
- Topic: Interior swap considering HUD
- Replies: 0
- Views: 2199
Interior swap considering HUD
I have been looking for a replacement for the SSEI that is not as rusty and have come across a decent one I am considering. The interior color/ condition is not quite as good as mine and i'm considering swapping interiors if I get it. Both are 03 SSEI’s but the other car does not have HUD option and ...
- Thu Apr 18, 2019 3:47 am
- Forum: 2000-2005 (other than GXP)
- Topic: Water Leak
- Replies: 3
- Views: 846
Water Leak
What is the most likely source of a water leak that shows up in the battery tray trying to make battery float?
Car is parked on flat ground not being driven. Mainly notice after torrential rains.
Other areas are dry when I get around to checking on it.
There is a little surface rust near bolt on ...
Car is parked on flat ground not being driven. Mainly notice after torrential rains.
Other areas are dry when I get around to checking on it.
There is a little surface rust near bolt on ...
- Wed Feb 13, 2019 8:08 pm
- Forum: 1992-1999
- Topic: Engine options
- Replies: 5
- Views: 2673
Re: Engine options
My 92 had EGR.
I always thought it was a mid-year change.
Didn't some 92's also have Magnavox ignition?
I always thought it was a mid-year change.
Didn't some 92's also have Magnavox ignition?
- Wed Jan 09, 2019 3:52 am
- Forum: 2000-2005 (other than GXP)
- Topic: Knock count always 1.
- Replies: 4
- Views: 1230
Re: Knock count always 1.
Did you change plug wires?
Also I may be wrong but I vaguely remember GM saying changing EGR needs a CASE learn to initially set new one.
Also I may be wrong but I vaguely remember GM saying changing EGR needs a CASE learn to initially set new one.
- Wed Aug 22, 2018 12:30 am
- Forum: 2000-2005 (other than GXP)
- Topic: P0420 wont go away!
- Replies: 10
- Views: 1709
Re: P0420 wont go away!
Since it struggles up hills, it makes me think you have some kind of ignition system issue. Is there any other indication of troubles? Does it feel good when you're WOT?
I have had ignition problems cause a P0420 before.
With your mileage, if your plug wires are original you may want to consider ...
I have had ignition problems cause a P0420 before.
With your mileage, if your plug wires are original you may want to consider ...
- Fri Aug 10, 2018 12:19 am
- Forum: 2000-2005 (other than GXP)
- Topic: supercharger 'rocks' noise
- Replies: 18
- Views: 1426
Re: supercharger 'rocks' noise
Have you checked the idler pulley & the tensioner pulley on the SC belt train?
It is very common for bearings in these to go bad.
It is very common for bearings in these to go bad.
- Fri Jul 20, 2018 10:34 pm
- Forum: Audio (and aftermarket electronics)
- Topic: Any pics of a stock CD driver by itself?
- Replies: 7
- Views: 3200
Re: Any pics of a stock CD driver by itself?
This was my experience with an '00 and '02 Bose.
http://www.pontiacbonnevilleclub.com/forum/post117813.html#p117813
I found another '02 head unit, swapped the internal CDs and it worked fine.
To save the Tech2 charge you can see if Andrew has a head unit from a Bonneville close to yours and swap ...
http://www.pontiacbonnevilleclub.com/forum/post117813.html#p117813
I found another '02 head unit, swapped the internal CDs and it worked fine.
To save the Tech2 charge you can see if Andrew has a head unit from a Bonneville close to yours and swap ...
- Sun Jun 17, 2018 9:13 pm
- Forum: General Chat
- Topic: 2001 front-end
- Replies: 1
- Views: 1529
Re: 2001 front-end
Could be lower control arm has worn bushing (common problem).
- Sun Jun 17, 2018 9:12 pm
- Forum: General Chat
- Topic: Enjoying this 1994 Bonneville SSE
- Replies: 2
- Views: 1787
Re: Enjoying this 1994 Bonneville SSE
Sorry for you loss.
That generation is still my favorite.
Sounds like a good one.
That generation is still my favorite.
Sounds like a good one.
- Thu Jun 07, 2018 1:48 am
- Forum: General Chat
- Topic: Well this is interesting
- Replies: 5
- Views: 1372
Re: Well this is interesting
In regard to mileage and platinum:
Back in the early 90's with my 92 L27, I didn't believe the 100k mile claim in the manual. I ran the original platinums to see how long they would last. They survived to 100k and were beyond done at 150k.
On my '00 and'03 L67s, I ran original platinums to 120~125k ...
Back in the early 90's with my 92 L27, I didn't believe the 100k mile claim in the manual. I ran the original platinums to see how long they would last. They survived to 100k and were beyond done at 150k.
On my '00 and'03 L67s, I ran original platinums to 120~125k ...
- Mon Jun 04, 2018 11:31 pm
- Forum: General Chat
- Topic: Well this is interesting
- Replies: 5
- Views: 1372
Well this is interesting
A few months back, I had a bad spark plug wire on the 03. They were the 7mm Beldens for series 2.
My 93 had 8mm Beldens for series 1 that were put on just before I wrecked it. Rather than getting a new set of 7mm's, I grabbed the front three 8mm ones (rear ones were smashed against firewall).
It ran ...
My 93 had 8mm Beldens for series 1 that were put on just before I wrecked it. Rather than getting a new set of 7mm's, I grabbed the front three 8mm ones (rear ones were smashed against firewall).
It ran ...
- Tue May 08, 2018 12:13 am
- Forum: 2000-2005 (other than GXP)
- Topic: Freeze plugs need help!
- Replies: 9
- Views: 1566
Re: Freeze plugs need help!
It may be possible to have this gasket leak water in oil but I have never heard of it or have seen any posts about it.
Intake does not have to come off. Just pull engine, unbolt flex plate and drop oil pan.
Twice I pulled engine to do it and one time when having transmission work done, the shop let ...
Intake does not have to come off. Just pull engine, unbolt flex plate and drop oil pan.
Twice I pulled engine to do it and one time when having transmission work done, the shop let ...
- Thu May 03, 2018 12:38 am
- Forum: 2000-2005 (other than GXP)
- Topic: Freeze plugs need help!
- Replies: 9
- Views: 1566
Re: Freeze plugs need help!
See my two replies on this thread.
http://www.pontiacbonnevilleclub.com/fo ... 01243.html
It would have been so much nicer if they did use freeze plugs.
http://www.pontiacbonnevilleclub.com/fo ... 01243.html
It would have been so much nicer if they did use freeze plugs.
- Tue Apr 24, 2018 11:32 pm
- Forum: 2000-2005 (other than GXP)
- Topic: fuel economy
- Replies: 11
- Views: 1572
Re: fuel economy
Oxygen sensor upstream of cat would be my next go to.
- Thu Mar 29, 2018 12:23 am
- Forum: General Chat
- Topic: A thing happened to me too
- Replies: 4
- Views: 1612



