 Last additions - michaelbsc's Gallery
|
1995 SSE Vacuum Reservior next to MaxiPanel258 viewsLocation of the vacuum reservoir pre-'96 modelsJun 14, 2011
|
|
1995 SSE Vacuum Reservior between MaxiPanel and wiper motor252 viewsLocation of the vacuum reservoir pre-'96 modelsJun 14, 2011
|
|
Blower Control Module out, in hand358 viewsThis is the blower control module after it is out and disconnected. It's not much, just a giant heatsink and a few wires. Jul 30, 2009
|
|
MaxiFues panel right side with 10mm deepwell socket353 viewsThe nuts to remove the MaxiFusePanel are 10mm, and you need a deepwell socket to get over the stud welded to the firewall. The left (passenger side) nut is clearly visible with the panel cover removed, but the right (about centerline) nut is very difficult to see if you don't know what to look for. And it's WAY back there. You'll have to move the wires.Jul 30, 2009
|
|
BCM In the HCAV Ductwork350 viewsThis is what the ductwork looks like after you have the Maxi Panel out of the way. It's a paint to move, but once you get the wire bundles positioned there is room to fish out the unit.Jul 30, 2009
|
|
Empty Hole with BCM removed369 viewsThis is what the top of the HVAC ductwork looks like with the Blower Control module removed. The front of the car is toward teh bottom of the picture.Jul 30, 2009
|
|
|
|
|
|
Home
Login
Album list
Last comments
Most viewed
Top rated
My Favorites
Search