Page 1 of 1
HUD Failure
Posted: Thu Feb 20, 2025 3:24 pm
by Pair of SSEI
HUD {Heads Up display) is blank this morning. I can hear the motor running when I change its position on windshield, so I do not think it is the fuse or location on windshield. What should be my next step?
Re: HUD Failure
Posted: Mon Feb 24, 2025 12:25 pm
by Sirius
I'm not sure where you go from here, but if you need to replace the HUD, I have one out of my old 93 SSE I can send to you for cheap. Assuming the 93 unit is interchangeable with your 97.
Re: HUD Failure
Posted: Fri Feb 28, 2025 10:38 am
by Pair of SSEI
Going to remove and try to solder cold joint. "Internet suggestion". But will keep your offer in mind.
Re: HUD Failure
Posted: Fri Feb 28, 2025 7:02 pm
by harofreak00
I'm pretty sure the HUD's are different from 93 and 97. 97 being all digital and 93 being analog or cable driven?
Re: HUD Failure
Posted: Sat Mar 01, 2025 11:50 am
by J Wikoff
I know 92 height was controlled with a cable.
Re: HUD Failure
Posted: Wed Mar 12, 2025 11:36 am
by Sirius
Yes, the 93 is cable operated too.