PontiacBonnevilleClub.com

I searched and may have missed it, but has anyone done a write up on removing the front fender? My son was involved in a hit and run accident that left him with a crunched driver side fender. Think I've found one the right color (I hope), just wondering what was involved in replacing it. Thanks

The torn bolts you can see along the inside of the hood, 10 mm nut and bolt inside the fender behind the headlight holding the bumper to the fender - one of these is often a major pain! One inside the fender between the wheel well and door about halfway up and two on the very bottom behind the rocker trim. It's been a while but I think that covers the basics for the most part other then the pop clips that you remove for the fender well liner.

Thanks for the reply, exactly what I was looking for. New (used) fender will be at local salvage yard Monday, hopefully it will match - they didn't know the paint code of the car it came off of but it is supposed to be off a 03 silver SLE.