PontiacBonnevilleClub.com

so I installed some interior LED tubes replacing the LED strips that I did have installed and it keeps blowing the fuse. I've got it wired to the front cigarette lighter and to a toggle switch.

Any ideas why it keeps blowing the fuse?

Side note if I put a fuse in they turn on, but when I flip the toggle switch to turn them off that's when the fuse blows.

Some kind of a short in the switch?

It was the same switch I used for the LED strips.. But I'll try an get another switch to check.

I agree with "xxdabroxx", probably a defective switch or possibly wiring on the back side of the switch. - BC