PontiacBonnevilleClub.com

I have 2002 SLE and the turn signals are flashing fast and loud. All bulbs are good. went to change out the turn signal flasher relay/module and learned thru a search on this website that the turn signal flasher and hazard flasher are integrated together in one module behind the flasher switch. THANKS for that.
so I pulled the flasher switch out pulled off the electrical connection and am left with this (see picture). I cant figure out how to separate the module from the switch (without breaking it of course). Any ideas. I have tried a number of wrestling moves to remove but it wont budge. Any ideas?

You need a small flat blade screwdriver to release the 4 tabs. Start with one, and hold it at an angle to keep it from popping back in. Just go around in a circle and keep releasing them.

those 4 small tabs at the top of the module (in the picture) and then pull the top off ?

figured it out. not sure what I did but I took it apart cleaned it with some compressed air duster put some CRC Brand QD Electrical Cleaner on it, waited for it to dry and put it back together and its working now. so i got that going for me. THANKS Andrew .