PontiacBonnevilleClub.com

Ok guys I am doing the gxp break upgrade for the front of my 2000 ssei and want the front braided break lines. Where do I get them from? I emailed ZZP and they said they don't sell them for this car!!

I am also looking for the same for my 2002 SSEi. Looking for front and rear for around $100

I forgot to mention I was doing the '05 gxp front caliper upgrade. Yeah so I called ZZP and emailed them. The email response said they don't have any that would fit but. The phone reply said they do and told me what to buy???
Well I just put in my order, we will see when I swap everything over.

So I ordered the front set off of ZZP web site,the extra long ones. Could have been a little longer, I could not reuse the stock bracket where the steel line and braided ones connect.

I had a local tubes and hoses shop make my brake lines custom.. cost about $200 but that was the easiest way to do it, no one makes parts for bonnies so custom is usually the only way to go. they are DOT approved and uses all the stock clips and brackets... might try to find a custom hose shop local to you or find a company the sells the fittings and hoses separate and "make" a custom line how you need it. I ordered a front and rear brake line and had them match the fittings and gave them the length i needed... the L and Right are the same but Mirrored.. so either mirror the L to R or have one connection that can be turned and tightened

sandrock bought some universal Russell lines from Summit, IIRC and a standard to AN adapter...

Redsmonte what calipers do you have on the front of your car?

Those are stock SSEi calipers...

Stock with some rattle can semi gloss black