PontiacBonnevilleClub.com

ok so i recently bought a white gxp which i have wanted for a very very long time. amoung the mods in my cars is always car audio and i have a large selection of jl audio stuff going into this one.
i will be running:
jl audio xr 6.5 mid an tweeter in front door on a 3--/4 bridged to 150/2
jl audio xr 6.5 coaxil in rear door on 450/4 channel 1 and 2 which is 150/2
jl audio tr 6x9 in rear deck on 450/4 channel 3 and 4 so 75/2
jl audio 12w7 on 1000/1
250 amp alt
kenwood ddx418.

this is a gonna be a little diffrent in the fact that my sle had 2 12w7's each on a 1000/1 with smaller front (just the 450/4) that was set up to be "showy". I am going back to where it started for me and making it disappear. i want to be able to carry groceries this time lol. the old setup

Too many speakers for me. It's a lot easier to make a pair of components image than a pile of speakers all over the car. Plus when you save all the money from the other speakers you can afford a better front stage.

Just my unsolicited opinion...

fyi i am fully aware of the challenges multiple drivers present......that part of the fun for me. If say cant be done...it wont work...will sound like sh!t ect is exactly what has driven my custom car company from day one
I have all the hardware, software, mics ect to make it work...but thanks for your .02

As long as you know what you're in for...

Looks like a clean install.

Nice install! Liking the contrast of those speaker grilles.

Do my car next?

got distracted for a couple days when my rapid prototype machine showed up but finished the deading of the back half today. will run most wiring tommorow and set up amp rack at least hope to. OH, and those that may wonder about 6.5's in the rear doors. you will have to reform the rear door panel in order to make it work. as is there is a gap from the 9 oclock to about 1 oclock position of the grill because of the curvature of the door panel.