Page 1 of 1
Installing Clear Corners
Posted: Fri Jul 11, 2008 1:47 pm
by razr89a
If someone tells me how to do it, (if there's not already) I can do a write up with pictures and what not, but i need to know how to first lol...so if there's like already a write up for this deal, gimmie the URL, but if there isn't tell me how to do it and i'll as stated before do a write up for this site with pictures....and words.........and magic!!
Re: Installing Clear Corners
Posted: Fri Jul 11, 2008 1:50 pm
by harofreak00
Are you talking about making them or installing them?
No need for a writeup about installing them, it just consists of removing the headlight and swapping them with the stock ones. If you want to take pictures of that, be our guest.
Re: Installing Clear Corners
Posted: Sat Jul 12, 2008 12:49 pm
by freneticburn
You can pretty much just rip the corner light off. It's secured by some clips and possibly a single screw that you can see from the top if the hood is open. The lightbulb piece itself just twist and pull. Very easy job. Mine personally gave me a bit of trouble as the clip things on my cleared ones were a tad too big and wouldn't clip on all the way. I just had to file it down a bit (it's plastic so be careful not to bust it). You'll understand what I'm saying when you have it off and are looking at it.
Re: Installing Clear Corners
Posted: Sun Jul 13, 2008 2:25 am
by willwren
Moved to the proper section.
Re: Installing Clear Corners
Posted: Sun Jul 13, 2008 2:35 am
by Roadtech195
Re: Installing Clear Corners
Posted: Sun Jul 13, 2008 3:10 am
by BumpinBonneville17
freneticburn wrote:You can pretty much just rip the corner light off. It's secured by some clips and possibly a single screw that you can see from the top if the hood is open. The lightbulb piece itself just twist and pull. Very easy job. Mine personally gave me a bit of trouble as the clip things on my cleared ones were a tad too big and wouldn't clip on all the way. I just had to file it down a bit (it's plastic so be careful not to bust it). You'll understand what I'm saying when you have it off and are looking at it.
Wow this is funny, I just put some CC's on and I had the exact same issue with the one clip being too short. I just reamed er in there though and got it to work. haha they all must have that flaw. But for $15 I'm not complaining.
Re: Installing Clear Corners
Posted: Tue Jul 15, 2008 3:04 pm
by blackout
Yeah these are the ones i ordered and did not have a single problem out of them.
Roadtech195 wrote:http://cgi.ebay.com/ebaymotors/_Car-Truck-Parts-Accessories__96-97-98-99-PONTIAC-BONNEVILLE-ALL-CLEAR-CORNER-LIGHTS_W0QQitemZ310065681630QQadnZCarQ20Q26Q20TruckQ20PartsQ20Q26Q20AccessoriesQQadiZ2865QQcmdZViewItem?hash=item310065681630&_trksid=p3756.m14.l1318
Can't go wrong for 10 bucks.