Maintenance over the weekend - Wheel hub and AirMix Actuator
Posted: Wed Dec 28, 2011 7:16 am
I have two common issues that I'm hoping to resolve this weekend. I am looking for any tips or lessons learned that may make this go more smoothly for a amateur (mechanic skills 3 out of 10).
Issue #1 - I have the "Service Stability System" problem. Per scanner, the front driver wheel speed is not registering, thus I have concluded that this is most likely the common WSS problem, requiring a new hub. Here's what I bought:
http://shop.advanceautoparts.com/webapp ... ELAMS_____
Issue #2 - The driver side air vent (both vents and foot vents) do not blow warm air. The passenger ones seem to work just fine and adjust as expected when I change the temp on the HVAC controls. Per my research, I have concluded that this is likely the Drivers Airmix Actuator. Here's what I bought:
http://shop.advanceautoparts.com/webapp ... OLAMS_____
I welcome any suggestions. Thanks!
Issue #1 - I have the "Service Stability System" problem. Per scanner, the front driver wheel speed is not registering, thus I have concluded that this is most likely the common WSS problem, requiring a new hub. Here's what I bought:
http://shop.advanceautoparts.com/webapp ... ELAMS_____
Issue #2 - The driver side air vent (both vents and foot vents) do not blow warm air. The passenger ones seem to work just fine and adjust as expected when I change the temp on the HVAC controls. Per my research, I have concluded that this is likely the Drivers Airmix Actuator. Here's what I bought:
http://shop.advanceautoparts.com/webapp ... OLAMS_____
I welcome any suggestions. Thanks!