Page 1 of 1
Disabling DRLs on 1998 se
Posted: Mon Jun 27, 2011 3:54 pm
by AJT2004
I wanted to install HID's on my brothers car but i need to disable the DRL's first. Ive been looking for a thread about it ,but could not
find a answer on how to do it. Does anyone know how disable them? thanks
Re: Disabling DRLs on 1998 se
Posted: Tue Jun 28, 2011 2:16 pm
by AJT2004
Ok, so i search around more and found that just have to pull the DRL "box" from in the fuse box and that's it. Is it really that easy?
Re: Disabling DRLs on 1998 se
Posted: Wed Jun 29, 2011 11:26 am
by LeSabre in Buffalo
Do you have high-beam or low-beam DRL? If you have high-beam DRL, don't bother.
Re: Disabling DRLs on 1998 se
Posted: Wed Jun 29, 2011 1:16 pm
by AJT2004
Low beam DRL
Re: Disabling DRLs on 1998 se
Posted: Wed Jun 29, 2011 2:02 pm
by 92BonneSE
There is a plug on the drivers side under the hood by the PCM and horn. Unplug. I think its easier to see if you take off the PCM cover
If you can't find it let me know and I can snap a pic for you
Re: Disabling DRLs on 1998 se
Posted: Thu Jun 30, 2011 2:06 pm
by AJT2004
Yea i looked this morning, i would like to see the pic. thank you
Re: Disabling DRLs on 1998 se
Posted: Thu Jun 30, 2011 2:20 pm
by Phantom
I do not have any pics with me buy it is easy remove the air box just to the right is the PCM cover remove the top of that now to the right there is a white connector disconnect that. I could not disconnect it from above so I removed the headlight and held the bottom of the connector then used my other hand to pull the other half from above.
Re: Disabling DRLs on 1998 se
Posted: Thu Jun 30, 2011 4:36 pm
by douellette88
to the OP, i did the same thing on my car. i also had a very hard time finding the connector. theres a ceramic block mounted inside the fender/near the pcm, follow the wire coming out of it and ull see the connector you need to unplug.
Re: Disabling DRLs on 1998 se
Posted: Sun Jul 03, 2011 10:12 am
by 92BonneSE
douellette88 wrote:to the OP, i did the same thing on my car. i also had a very hard time finding the connector. theres a ceramic block mounted inside the fender/near the pcm, follow the wire coming out of it and ull see the connector you need to unplug.
Right by where the front core and fender meet. Its hard to get a good pic of it
Re: Disabling DRLs on 1998 se
Posted: Sun Jul 03, 2011 2:48 pm
by AJT2004
Great pic, thanks. So i just disconnect the two wires leading in, then no more DRLs?
Re: Disabling DRLs on 1998 se
Posted: Sun Jul 03, 2011 2:55 pm
by douellette88
Don't unplug it from the white piece, follow the wires to find the plug