PontiacBonnevilleClub.com

Agree'd, I have to swap my fogs, and I have some more mods to add to the engine...

Looks like fun when weather isnt affecting the work. Also makes me wish for more H-body nuts around my area.

Shop did look warm though!

i still think andrew did all the work!! haha kidding

looks like a lot of fun, now i need to get a ssei or se/sc or sse/sc, or something!!

dont count me out for the next one!!

Nice work guys. Looks like you got a pretty nice shop there, that's awesome. I'll have to make my way up there sometime and check the place out for myself.

Anyway, glad you got that done, have fun with the Intense stuff

Kinda cool how the color of you car seems to change, light blue to gray/silver.

I forgot to mention the most important news of yesterday! Ed dropped my heat gun, while it was plugged in, into the parts washer bin. It was completely submerged. Luckily it wasn't powered on. We let it dry out for about 30 minutes and then turned it on. It seemed to work ok, and when he shut it off, it backfired and blew out a puff of smoke! After that, we let it run for about 5 minutes and it didn't seem to have a problem, should be ok.

00Beast wrote:

GoldenBullet wrote:i vote another mini meet at ed's soon when im not sick/ pre-occupied

LMAO, that may work.

i agree! summer's best, but maybe i can get some time off before that. time to start planning again!

bonnevillain wrote:

00Beast wrote:

GoldenBullet wrote:i vote another mini meet at ed's soon when im not sick/ pre-occupied

LMAO, that may work.

i agree! summer's best, but maybe i can get some time off before that. time to start planning again!

i was hoping like in February or something

Car looks great! What size pulley? Did you just paint the SC or is it ported also? I love the black SC, but I think I prefer all black valve covers to go with it, which reminds me I have to paint my SC housing yet so I can install it this spring.

Looks like a new home for Midwest meets!!

I could sure go for a day in there just to detail my car. Luckily I have the winery to do that in tonight.

yeah he didn't mention it, but his sig says 3.4

I don't have the porting stuff, so I just painted it. Yes, it's a 3.4, and it's going to get me in some trouble

Andrew, it blew out a flame when I shut it off, LOL.

Nice job, and the clear corners make the car look much better...very clean and sharp!

Thanks for all the compliments!! I changed my oil again with Mobil 1 5W-30, and a K&N HP-2001 filter, made sure the cooling system was all burped and full, and rotated the tires. I do love the cleared corners, especially now since I have legal bulbs, LOL.

swampthing wrote:i am likeing the clear corners alot... i think your car could pull of body colored headlight bezels...

btw yours in the only bonne that i have seen with that color

Honestly.. I'm thinking this concept car is the one that Ed has right now lol. It's exactly the same.
Theory: the color was a "test" to see how people reacted to it, and they never went through with it.
http://www.conceptcarz.com/vehicle/z679 ... ville.aspx

that would be craaaaaaazy

Ragsdale wrote:

swampthing wrote:i am likeing the clear corners alot... i think your car could pull of body colored headlight bezels...

btw yours in the only bonne that i have seen with that color

Honestly.. I'm thinking this concept car is the one that Ed has right now lol. It's exactly the same.
Theory: the color was a "test" to see how people reacted to it, and they never went through with it.
http://www.conceptcarz.com/vehicle/z679 ... ville.aspx

The Bonneville color palette adds Steel Blue Metallic, Rainforest Green Metallic and Sport Red Metallic for 2003

Marty said he saw an SLE in Sauk Centre the same color, and a guy on 3800pro says his buddy has that color SE.

i might be a little late on this but you mentioned MSD coils.. haven't heard any good things about those on our cars. i think alot of the 500+whp gp's going around here swear by stock coils and stock wires! i got a set of prj's on mine, which are like $120.00 from zzp, and they don't seem to sit real tight on the plugs. i'm considering going back to stock wires... just wondering did you put a bead of silicone under the orange rubber pieces on the ends of your LIM gaskets?

Yes, I put a small bead of RTV under the orange rubber pieces on the ends of the LIM gaskets.

There's an SSEi a mile from my house with the exact same color and rims...

All I can say is wow.... nice shop!

harofreak00 wrote:Yes, I put a small bead of RTV under the orange rubber pieces on the ends of the LIM gaskets.

He was very meticulus (read: anal) about making sure everything was sealed really well.

EDIT: And no, if one of my coils ever goes out I'll upgrade, till then I'll save my cash for something else. I have Beldin Premium wires on there, and they work great.