
If removing the throttle body...Why drain coolant?
- Ramcharger310
- SSE Member

- Posts: 103
- Joined: Mon Sep 01, 2014 6:57 pm
- Year and Trim: 01 Bonneville SSEi
- J Wikoff
- Administrator

- Posts: 17080
- Joined: Mon May 19, 2008 7:01 pm
- Year and Trim: 1992 SSE
2009 G8 GT - Location: Central Illinois
- Contact:
Re: If removing the throttle body...Why drain coolant?
Coolant runs through the TB.

WHITE WHINE - 1992 SSE Supercharged 236.26 ci (.040 Over) 15.090 at 90.2 MPH on old engine w/ slipping trans & melted O2 sensor - Gen 3 M62 and matching TB, Gen 2 Pully, Zillamotorsports Ported LIM, YT 1.72 Roller Rockers, SII FPR & Injectors, Hypertech Thermomaster chip w/ 160 Thermo, TransGo Shift Kit, Infinity/Pioneer Speakers & a 10" Alpine Type R Sub, all the watts, 140 amp Alternator, Ricepipe CAI w/ heatshield, Pilot Angel Eye Foglights, Clear Corners, '02 17" Chrome Bent 5's, Magnaflow F-Body Muffler and Hi-flo Cat, Ceramic Coated Ported Exhaust Manifolds, Fan Override, Monroe Reflex struts, red calipers
2009 G8 GT - Sport Red Metallic, loaded, SOLO Axlebacks, Rotofab Intake, Tuned, autodim mirror, removed intake manifold cover, HSV GTS triple gauge pod, two tone red-hot shifter and HSV SuperSport steering wheel, GXP rear sway bar and diffuser, 3.45 diff and various Camaro suspension bits, LED Taillights
- nos4blood70
- Certified Bonneville Nut

- Posts: 9522
- Joined: Mon May 10, 2010 6:11 pm
- Year and Trim: 2003 SLE
- Location: Chicago, IL
Re: If removing the throttle body...Why drain coolant?
I wouldn't drain the coolant, but you will have some dribble out. Just put some rags under that area and then just make sure your reservoir has the correct amount of coolant. With how little you use, it'll self bleed. At least it has in all of my experiences with removing the TB or the upper intake.
- Ramcharger310
- SSE Member

- Posts: 103
- Joined: Mon Sep 01, 2014 6:57 pm
- Year and Trim: 01 Bonneville SSEi
Re: If removing the throttle body...Why drain coolant?
nos4blood70 wrote:I wouldn't drain the coolant, but you will have some dribble out. Just put some rags under that area and then just make sure your reservoir has the correct amount of coolant. With how little you use, it'll self bleed. At least it has in all of my experiences with removing the TB or the upper intake.
Got it, thanks!


