1989 Bonnie caliper bolts
1989 Bonnie caliper bolts
Anyone know offhand what size Torx driver is needed to install and remove the bolts ? Thanks !
-
J Wikoff
- Administrator
- Posts: 17080
- Joined: Mon May 19, 2008 7:01 pm
- Year and Trim: 1992 SSE
2009 G8 GT - Location: Central Illinois
- Contact:
Re: 1989 Bonnie caliper bolts
Well, 92-99 is a 3/8" Allen socket. I thought 87-91 was the same.
WHITE WHINE - 1992 SSE Supercharged 236.26 ci (.040 Over) 15.090 at 90.2 MPH on old engine w/ slipping trans & melted O2 sensor - Gen 3 M62 and matching TB, Gen 2 Pully, Zillamotorsports Ported LIM, YT 1.72 Roller Rockers, SII FPR & Injectors, Hypertech Thermomaster chip w/ 160 Thermo, TransGo Shift Kit, Infinity/Pioneer Speakers & a 10" Alpine Type R Sub, all the watts, 140 amp Alternator, Ricepipe CAI w/ heatshield, Pilot Angel Eye Foglights, Clear Corners, '02 17" Chrome Bent 5's, Magnaflow F-Body Muffler and Hi-flo Cat, Ceramic Coated Ported Exhaust Manifolds, Fan Override, Monroe Reflex struts, red calipers
2009 G8 GT - Sport Red Metallic, loaded, SOLO Axlebacks, Rotofab Intake, Tuned, autodim mirror, removed intake manifold cover, HSV GTS triple gauge pod, two tone red-hot shifter and HSV SuperSport steering wheel, GXP rear sway bar and diffuser, 3.45 diff and various Camaro suspension bits, LED Taillights
Re: 1989 Bonnie caliper bolts
No it's indeed torx.
-
rustyroger
- Posts like an LG3
- Posts: 381
- Joined: Fri Aug 05, 2011 10:53 am
- Year and Trim: 1998 Buick Park Avenue
- Location: Margate, England.
Re: 1989 Bonnie caliper bolts
Perhaps they were replaced with bolts from a later car?. My guess is T50 or T60 for a bolt tightened as much as a caliper bolt.
Roger.
Roger.