HELLO MY NAME IS ELI FROM ISREAL AND I HAVE LESABRE 1995 CUSTUM.
My car is no full of gauges, I know that in 1995 there was a model with full gauges, if I had a DIAGRAM wires of two culsters I could fit a full gauges to my car. If anyone has 2 wiring diagram that I would be happy. have seen On eBay the Connection is the same but I will not buy before I know for sure if the wires are right.
Thanks in advance to me.
SWAP CULSTER LESABRE 1995 CUSTUM.
-
RJolly87
- Certified Bonneville Nut
- Posts: 5403
- Joined: Tue May 27, 2008 8:53 am
- Year and Trim: 1993 Buick Park Avenue
1994 Buick Regal Custom - Location: Las Cruces, NM
Re: SWAP CULSTER LESABRE 1995 CUSTUM.
This is the only documented swap that I am aware of, and it is on a 1993.
http://www.pontiacbonnevilleclub.com/fo ... 17178.html
It would be best to get the Factory Service manuals for your car. This is what they look like, however this set does not appear to ship internationally: http://www.ebay.com/itm/1995-PONTIAC-BO ... 4R&vxp=mtr
In short, rewiring and adding wires is necessary for the swap to function. You will also need the module that contains all of the warning lights on the top of the dash that goes behind the Translucent strip with the Buick badge on it.
http://www.pontiacbonnevilleclub.com/fo ... 17178.html
It would be best to get the Factory Service manuals for your car. This is what they look like, however this set does not appear to ship internationally: http://www.ebay.com/itm/1995-PONTIAC-BO ... 4R&vxp=mtr
In short, rewiring and adding wires is necessary for the swap to function. You will also need the module that contains all of the warning lights on the top of the dash that goes behind the Translucent strip with the Buick badge on it.
~Randall~
1993 Buick Park Avenue - 197k - Some odds and ends done - Simply won't die
1994 Buick Regal - 78k - Bone stock - Always ready for a good kicking
1990 Oldsmobile 88 - Gone to a better place
1993 Buick Park Avenue - 197k - Some odds and ends done - Simply won't die
1994 Buick Regal - 78k - Bone stock - Always ready for a good kicking
1990 Oldsmobile 88 - Gone to a better place
Re: SWAP CULSTER LESABRE 1995 CUSTUM.
http://i281.photobucket.com/albums/kk20 ... 0374443534
http://i281.photobucket.com/albums/kk20 ... 0375743087
don't know if these prints are what you need. they are from my 95 BUICK PA normally aspirated with guage package.
http://i281.photobucket.com/albums/kk20 ... 0375743087
don't know if these prints are what you need. they are from my 95 BUICK PA normally aspirated with guage package.
-
RJolly87
- Certified Bonneville Nut
- Posts: 5403
- Joined: Tue May 27, 2008 8:53 am
- Year and Trim: 1993 Buick Park Avenue
1994 Buick Regal Custom - Location: Las Cruces, NM
Re: SWAP CULSTER LESABRE 1995 CUSTUM.
Unfortunately that's not going to be it, but if you have the one with the pinout of the cluster connector, that could help greatly. Also, does this book cover both the C/H body buick, or just the C body?gmman wrote:http://i281.photobucket.com/albums/kk20 ... 0374443534
http://i281.photobucket.com/albums/kk20 ... 0375743087
don't know if these prints are what you need. they are from my 95 BUICK PA normally aspirated with guage package.
~Randall~
1993 Buick Park Avenue - 197k - Some odds and ends done - Simply won't die
1994 Buick Regal - 78k - Bone stock - Always ready for a good kicking
1990 Oldsmobile 88 - Gone to a better place
1993 Buick Park Avenue - 197k - Some odds and ends done - Simply won't die
1994 Buick Regal - 78k - Bone stock - Always ready for a good kicking
1990 Oldsmobile 88 - Gone to a better place
Re: SWAP CULSTER LESABRE 1995 CUSTUM.
the service manual that I have does cover c and h.
Re: SWAP CULSTER LESABRE 1995 CUSTUM.
http://i281.photobucket.com/albums/kk20 ... 0404375881
R JOLLY
is this the kind of data you referred to?
R JOLLY
is this the kind of data you referred to?
-
RJolly87
- Certified Bonneville Nut
- Posts: 5403
- Joined: Tue May 27, 2008 8:53 am
- Year and Trim: 1993 Buick Park Avenue
1994 Buick Regal Custom - Location: Las Cruces, NM
Re: SWAP CULSTER LESABRE 1995 CUSTUM.
I am not sure, it's posted out of context. I seem to remember there being a diagram of the connector itself at one point in there.
~Randall~
1993 Buick Park Avenue - 197k - Some odds and ends done - Simply won't die
1994 Buick Regal - 78k - Bone stock - Always ready for a good kicking
1990 Oldsmobile 88 - Gone to a better place
1993 Buick Park Avenue - 197k - Some odds and ends done - Simply won't die
1994 Buick Regal - 78k - Bone stock - Always ready for a good kicking
1990 Oldsmobile 88 - Gone to a better place
Re: SWAP CULSTER LESABRE 1995 CUSTUM.
will look again.
Re: SWAP CULSTER LESABRE 1995 CUSTUM.
http://i281.photobucket.com/albums/kk20 ... 0492455165
R JOLLY
take a look at this page. I could get the connection, as an example, between B8 (OIL PRESSURE GUAGE INPUT FROM OIL PRESSURE SENSOR) and circuit 31. reference my earlier post of schematic for gauge cluster.
think this will help?
PS I think UB3 is gauge package. UB 2 (shown to the right of page) is likely what he has now.
R JOLLY
take a look at this page. I could get the connection, as an example, between B8 (OIL PRESSURE GUAGE INPUT FROM OIL PRESSURE SENSOR) and circuit 31. reference my earlier post of schematic for gauge cluster.
think this will help?
PS I think UB3 is gauge package. UB 2 (shown to the right of page) is likely what he has now.