Does it even exist?

[haro1225]

My friend is trying to tell me that he met a guy at a car show whose son supposedly has a 2003 SSEi that has a 2.4" pulley and runs low 12's. I think that if something like this is around, it would be some kind of record and that it would be well known. I don't believe it.What do you guys think?

[crash93ssei]

It certainly is possible, but I think we would know. I have seen a few modded Bonnevilles for sale on craigslist though that I have never known of before. I know of a guy in Grand Rapids that had a dark bronzemist 2002ish SSEi with a bunch of ZZP work done, I think he was around 12s but never had any part of any forums, he sold the car last year.

[nos4blood70]

Not sure on the 2.4 pulley part but I'm sure there's still a couple guys out there still doing stuff to these rides.

[optimist prime]

I don't see where it would be that hard to believe, follow mattstrikes build s/c and a turbo and I could see it pulling 12's all depends on just how much he's put into it my L67 I'm working on now is pushing 3,300 dollars and I'm not done yet

[haro1225]

I know that it's possible to run 12's. Pat's car and I think a couple others run 12's but the things they were telling me didn't add up about this particular car.

[optimist prime]

Ask him to see a time slip if it actually runs 12's then proving it shouldn't be a problem for him either that or make it a 100 dollar wager and tell him you want to be there in person

[1oldman]

Didn't SLP or ZZP build a high 11 or 12 second Pontiac. I don't remember if it was a GP or a Bonneville. - BC

[yourgrandma]

There are MANY MANY L67 bpowered cars in and under the 12s. Bonnevilles are obviously a bit more rare, but badssei was in the 10s. Pats runs mid 12s, theres a few in the 11s with turbos. Certainly no shortage of high 11 second grand prix on the various forums.

[Zeik75]

Could easily be a grandprix. People ask what year my "grand prix" is all the time...

[BillBoost37]

Tmk the smallest pulley that was mass produced was a 2.55, I have a 2.50 in my possession. I don't think a 2.4 would fit with the ZZP snout turn down tool that I have.