Front braided break lines
-
Rubidon
- SLE Member

- Posts: 76
- Joined: Fri Oct 04, 2013 4:09 am
- Year and Trim: 2000 SSEI
- Location: Michigan
Front braided break lines
Ok guys I am doing the gxp break upgrade for the front of my 2000 ssei and want the front braided break lines. Where do I get them from? I emailed ZZP and they said they don't sell them for this car!!
GXP front break upgrade, hockey puck front mount, aeroforce gauge in right top vent, Intense FWI
- NewBonneGuy
- SLE Member

- Posts: 34
- Joined: Mon Dec 09, 2013 3:23 am
- Year and Trim: 2002 Bonneville SSEi
- Location: California
Re: Front braided break lines
I am also looking for the same for my 2002 SSEi. Looking for front and rear for around $100
-
Rubidon
- SLE Member

- Posts: 76
- Joined: Fri Oct 04, 2013 4:09 am
- Year and Trim: 2000 SSEI
- Location: Michigan
Re: Front braided break lines
I forgot to mention I was doing the '05 gxp front caliper upgrade. Yeah so I called ZZP and emailed them. The email response said they don't have any that would fit but. The phone reply said they do and told me what to buy???
Well I just put in my order, we will see when I swap everything over.
Well I just put in my order, we will see when I swap everything over.
GXP front break upgrade, hockey puck front mount, aeroforce gauge in right top vent, Intense FWI
-
Rubidon
- SLE Member

- Posts: 76
- Joined: Fri Oct 04, 2013 4:09 am
- Year and Trim: 2000 SSEI
- Location: Michigan
Re: Front braided break lines
So I ordered the front set off of ZZP web site,the extra long ones. Could have been a little longer, I could not reuse the stock bracket where the steel line and braided ones connect.
GXP front break upgrade, hockey puck front mount, aeroforce gauge in right top vent, Intense FWI
Re: Front braided break lines
I had a local tubes and hoses shop make my brake lines custom.. cost about $200 but that was the easiest way to do it, no one makes parts for bonnies so custom is usually the only way to go. they are DOT approved and uses all the stock clips and brackets... might try to find a custom hose shop local to you or find a company the sells the fittings and hoses separate and "make" a custom line how you need it. I ordered a front and rear brake line and had them match the fittings and gave them the length i needed... the L and Right are the same but Mirrored.. so either mirror the L to R or have one connection that can be turned and tightened






Shane "RedZMonte"
2004 Z16 Z06: Virgin
2000 SSEi: Kenwood DDX512, 3.25" MPS, ZZP DP, PLog, Puck Mount, NGK TR7's, DHP Tuned
1995 Monte Z34: T04e "60" turbo, 42.5# injectors, Borla Catback, OBDII swap, DHP Tuned, Much more...
2004 Z16 Z06: Virgin
2000 SSEi: Kenwood DDX512, 3.25" MPS, ZZP DP, PLog, Puck Mount, NGK TR7's, DHP Tuned
1995 Monte Z34: T04e "60" turbo, 42.5# injectors, Borla Catback, OBDII swap, DHP Tuned, Much more...
-
00Beast
- Retired Site Developer

- Posts: 20960
- Joined: Tue May 27, 2008 10:30 pm
- Year and Trim: '17 Silverado 1500
- Location: MN/IA
- Contact:
Re: Front braided break lines
sandrock bought some universal Russell lines from Summit, IIRC and a standard to AN adapter...
Bye Bye:

RIP sandrock

RIP sandrock
Sirius wrote:Think about it. You’re tooling down the road in your Prius, knowing full-well that this thing being green is as big a sham as federally mandated ethanol-enriched gas, Russia pulling out of Ukraine, and Obamacare.
-
Rubidon
- SLE Member

- Posts: 76
- Joined: Fri Oct 04, 2013 4:09 am
- Year and Trim: 2000 SSEI
- Location: Michigan
Re: Front braided break lines
Redsmonte what calipers do you have on the front of your car?
GXP front break upgrade, hockey puck front mount, aeroforce gauge in right top vent, Intense FWI
-
00Beast
- Retired Site Developer

- Posts: 20960
- Joined: Tue May 27, 2008 10:30 pm
- Year and Trim: '17 Silverado 1500
- Location: MN/IA
- Contact:
Re: Front braided break lines
Those are stock SSEi calipers...
Bye Bye:

RIP sandrock

RIP sandrock
Sirius wrote:Think about it. You’re tooling down the road in your Prius, knowing full-well that this thing being green is as big a sham as federally mandated ethanol-enriched gas, Russia pulling out of Ukraine, and Obamacare.
Re: Front braided break lines
Stock with some rattle can semi gloss black 
Shane "RedZMonte"
2004 Z16 Z06: Virgin
2000 SSEi: Kenwood DDX512, 3.25" MPS, ZZP DP, PLog, Puck Mount, NGK TR7's, DHP Tuned
1995 Monte Z34: T04e "60" turbo, 42.5# injectors, Borla Catback, OBDII swap, DHP Tuned, Much more...
2004 Z16 Z06: Virgin
2000 SSEi: Kenwood DDX512, 3.25" MPS, ZZP DP, PLog, Puck Mount, NGK TR7's, DHP Tuned
1995 Monte Z34: T04e "60" turbo, 42.5# injectors, Borla Catback, OBDII swap, DHP Tuned, Much more...


