Ok I so I need to remove the interior to get the carpets out
97 SSEI
Can anyone please give me some helpful tips in doing this so I do not break anything- The Seats, Console, Trim, ETC I am deathly worried that I will snap bits and bobs.
Please help
Carpet removal help
- J Wikoff
- Administrator

- Posts: 17080
- Joined: Mon May 19, 2008 7:01 pm
- Year and Trim: 1992 SSE
2009 G8 GT - Location: Central Illinois
- Contact:
Re: Carpet removal help
If you haven't done it yet, take pictures of the steps of taking the center console apart, so you know how it all goes back together. I tend to put fasteners back where they came from when appropriate so I don't lose them.

WHITE WHINE - 1992 SSE Supercharged 236.26 ci (.040 Over) 15.090 at 90.2 MPH on old engine w/ slipping trans & melted O2 sensor - Gen 3 M62 and matching TB, Gen 2 Pully, Zillamotorsports Ported LIM, YT 1.72 Roller Rockers, SII FPR & Injectors, Hypertech Thermomaster chip w/ 160 Thermo, TransGo Shift Kit, Infinity/Pioneer Speakers & a 10" Alpine Type R Sub, all the watts, 140 amp Alternator, Ricepipe CAI w/ heatshield, Pilot Angel Eye Foglights, Clear Corners, '02 17" Chrome Bent 5's, Magnaflow F-Body Muffler and Hi-flo Cat, Ceramic Coated Ported Exhaust Manifolds, Fan Override, Monroe Reflex struts, red calipers
2009 G8 GT - Sport Red Metallic, loaded, SOLO Axlebacks, Rotofab Intake, Tuned, autodim mirror, removed intake manifold cover, HSV GTS triple gauge pod, two tone red-hot shifter and HSV SuperSport steering wheel, GXP rear sway bar and diffuser, 3.45 diff and various Camaro suspension bits, LED Taillights
-
Bob Dillon
- Retired Gearhead

- Posts: 1854
- Joined: Wed May 21, 2008 9:38 pm
- Year and Trim: 1997 SE Anniversary Edition
Re: Carpet removal help
If you're placing the carpet, don't cut the new one too short at the sides.
Ask me how I know.
Ask me how I know.
462 cubic inches of REAL Pontiac power.


-
GotBonneBWitMe
- SSEi Member

- Posts: 186
- Joined: Tue Jul 23, 2013 8:46 pm
- Year and Trim: 96 SSEI
Re: Carpet removal help
How do you know??Bob Dillon wrote:If you're placing the carpet, don't cut the new one too short at the sides.
Ask me how I know.
-
Bob Dillon
- Retired Gearhead

- Posts: 1854
- Joined: Wed May 21, 2008 9:38 pm
- Year and Trim: 1997 SE Anniversary Edition
Re: Carpet removal help
When you have to use sheetmetal screws to anchor the carpet inside the sill plates.GotBonneBWitMe wrote:How do you know??Bob Dillon wrote:If you're placing the carpet, don't cut the new one too short at the sides.
Ask me how I know.
462 cubic inches of REAL Pontiac power.





