hood after last bit of prime and sanding
gas good after prime closeup, after sanding. (added a second prime coat after but forgot to snag a picture)
drivers side dog leg patch closeup after last coat of prime and sanding
passenger side last bit of prime and sanding (buddy of mine was helping me with that)
hood after last bit of prime and sanding aswell
closer look
passenger side all masked up and ready for color! almost there!!
underside of the hood ready for color!
top of the hood ready for color
and the main part all ready for action
passenger side after color! looks sooo beautiful in person! (no clear coat yet. it is on it now, just didnt take any pictures of
it. tomorrow i will when it gets out of the booth and i start putting it all back together)
forgot about the actuall gas door. painted that so it would blend with the rest. all i did was scuff the clear off, scuffed the edges and colored it over top of old color. not too big of a deal. turned out fine
the hood midway through color (took alot of paint... im stil learning the methods of Painting efficiency.. that part definitely kicked my ass..)
drivers side midway through color, still needed one more thicker coat. but shes staring to come togeher!
drivers side finally finished and done with everything. (will get pictures of clearcoat of the hood and other side tomorrow,
this is the only pictures i had time to take with the CC on because time was of the essance)
and about the latch, when i get home im going to take that back off, sandblast it and paint it black... or just go to feezels and buy another one that isnt poopy..
dont worry, i scrubbed the crap out of the wheels, and buffed the heck out of the bumpers and doors and the rest of the car, i still need to get pictures of the car outside tomorrow when i bring it home, but *dang* does she look amazing now!!
lol.. Seriously good job, seeing this makes me wanna tackle my rust i got starting on my car.
