Transgo confusion

[Mark Fahey]

I received the Transgo shift kit today but when I opened the box, the instructions consisted of 1 page of exploded views, no step by step instructions and not even any torque values for the bolts. I figured the Transgo website would have something more detailed but I couldn't find anything.
I then called their support number and the person immediately told me that the transmission had to come out and all the work that involved. I thought that the whole purpose of the shift kit was to not have to remove or lower the transmission which is way more work than I want to get into.
Can I just install the springs and pistons and not do the 3rd gear clutch seal and the seal for reverse or is this an all or nothing deal?

[00Beast]

Yes, you can just install the part for in the pan. Obviously trans-go wants their kit installed their way, but you don't have to remove the side-pan like they instruct, you just don't get the "full kit" like they'd want...

[SSEiMan01]

You'll notice the most difference with the parts in the lower pan anyway. That's all I did/have ever done.

[Mark Fahey]

Thank you very much for your response. I'll put the parts in tomorrow and hopefully that will take care of the hard shifts.