I want to mod my car...
-
Petermcmxii
- SLE Member

- Posts: 39
- Joined: Sat Apr 07, 2012 10:38 pm
- Year and Trim: 2002 Benneville SLE
- Location: Johnson City, TN
I want to mod my car...
I've already got NGK TR55 spark plugs. That's it though and I don't kow where to start and I'm pulling about $200-$250 a week at work so if ya'll have any ideas please share.
- nos4blood70
- Certified Bonneville Nut

- Posts: 9522
- Joined: Mon May 10, 2010 6:11 pm
- Year and Trim: 2003 SLE
- Location: Chicago, IL
Re: I want to mod my car...
First things first. Did you do all the maintenance on your car?
Also, you can't really make much power with your SLE. What I would do if I were you is either swap an L67 into your Bonneville or top swap.
Also, you can't really make much power with your SLE. What I would do if I were you is either swap an L67 into your Bonneville or top swap.
-
01bonneSC
- Certified Bonneville Nut

- Posts: 4938
- Joined: Sat May 24, 2008 5:18 pm
- Year and Trim: 05 Chevy 'Hoe
1997 'maro (3.8L M5)
89 SkiDoo - Location: Sycamore, IL
Re: I want to mod my car...
Read this
http://www.pontiacbonnevilleclub.com/fo ... 25655.html
And then do some looking around in the TECHINFO section that's on the header of all the pages.
You can make ok power NA. PCM tune, rockers, FWI, down pipe and a hi flow cat would be a nice budget friendly mod list.
But yes make sure all your general maintenance items are addressed and car is running great in stock condition.
http://www.pontiacbonnevilleclub.com/fo ... 25655.html
And then do some looking around in the TECHINFO section that's on the header of all the pages.
You can make ok power NA. PCM tune, rockers, FWI, down pipe and a hi flow cat would be a nice budget friendly mod list.
But yes make sure all your general maintenance items are addressed and car is running great in stock condition.
Re: I want to mod my car...
I agree with the basics if your maintenance is all up to snuff. I would start with Intake (Intese seems to be the popular one) and a Downpipe 2.5" (I like ZZPerformance). from there you have a few directions, like mentioned above PCM would be good as well as rockers. what are you wanting to make power wise, thoes few things will give you better power, as well aschanging your diff to a more aggressive one. from there you will be looking at major work like a blower top swap or a turbo setup (i would do a turbo way before a top swap). Hope this will be of some help.
Now you can also make your own parts if you have the ability to, i built an intake for my SSEi as well as did a "Puck Mount" (very good investment and cheap)
These are probably your top 3 vendors for 3800 cars:
http://www.zzperformance.com (i get most my parts from ZZP)
http://www.intense-racing.com (very good with bonnie's ask anyone here)
http://www.3800performance.com (been around from a long time)
Intake (Alluminum w/ K&N, Home made):


Downpipe (ZZP):


Puck Mount (more responcive):
http://www.pontiacbonnevilleclub.com/fo ... 12632.html
S
Now you can also make your own parts if you have the ability to, i built an intake for my SSEi as well as did a "Puck Mount" (very good investment and cheap)
These are probably your top 3 vendors for 3800 cars:
http://www.zzperformance.com (i get most my parts from ZZP)
http://www.intense-racing.com (very good with bonnie's ask anyone here)
http://www.3800performance.com (been around from a long time)
Intake (Alluminum w/ K&N, Home made):


Downpipe (ZZP):


Puck Mount (more responcive):
http://www.pontiacbonnevilleclub.com/fo ... 12632.html
S
Shane "RedZMonte"
2004 Z16 Z06: Virgin
2000 SSEi: Kenwood DDX512, 3.25" MPS, ZZP DP, PLog, Puck Mount, NGK TR7's, DHP Tuned
1995 Monte Z34: T04e "60" turbo, 42.5# injectors, Borla Catback, OBDII swap, DHP Tuned, Much more...
2004 Z16 Z06: Virgin
2000 SSEi: Kenwood DDX512, 3.25" MPS, ZZP DP, PLog, Puck Mount, NGK TR7's, DHP Tuned
1995 Monte Z34: T04e "60" turbo, 42.5# injectors, Borla Catback, OBDII swap, DHP Tuned, Much more...
-
Petermcmxii
- SLE Member

- Posts: 39
- Joined: Sat Apr 07, 2012 10:38 pm
- Year and Trim: 2002 Benneville SLE
- Location: Johnson City, TN
Re: I want to mod my car...
I've changed oil, spark plugs and wires, coolant, and my starter. Other than that I haven't done much more maintenance. I just want to get from 0-60 a bit faster, thats it lol
Re: I want to mod my car...
everything listed above should help but you will see the biggest increase in mid-high rpms. I would start here and see how you like it. Keep in mind, these mods will make it feel better but not going to make it some crazy powerhouse (or everyone would do it) From here you would be looking at a gears, cam and headers or boost for a more drastic improvment.
S
S
Shane "RedZMonte"
2004 Z16 Z06: Virgin
2000 SSEi: Kenwood DDX512, 3.25" MPS, ZZP DP, PLog, Puck Mount, NGK TR7's, DHP Tuned
1995 Monte Z34: T04e "60" turbo, 42.5# injectors, Borla Catback, OBDII swap, DHP Tuned, Much more...
2004 Z16 Z06: Virgin
2000 SSEi: Kenwood DDX512, 3.25" MPS, ZZP DP, PLog, Puck Mount, NGK TR7's, DHP Tuned
1995 Monte Z34: T04e "60" turbo, 42.5# injectors, Borla Catback, OBDII swap, DHP Tuned, Much more...





