The car has been getting a slight amount of water in the oil every 3k miles, not too much, but enough to cause me to replace the intake gasket. This is what I assumed to be the problem.
So I replaced the intake gasket, and apparently I screwed up the installation. It smoked really bad afterwards. (white smoke, vapors out of tail pipe)
With me working a 50+hour week, I dont have time to re-do it, so I took it to a dealership to be fixed. They installed a intake gasket, telling me I done a perfect job and dont know why its messed up. After the installation, it still smokes as bad as when I screwed it up the first time. They are telling me its a head gasket, how would that be possible if the head gasket was okay before I screwed up the gasket the first time?
Need some help guys, this is my DD!








