I've got a vibration that I feel in the gas pedal. I suspect motor mounts. Can someone supply pictures and/or desctiption of where these things are located? I've blown out the front mount and have replaced with a solid (hockey puck) mount. Are there others and if so where are they?
Thanks,
'01 SSEi Motor Mounts
-
leatherneck
- SSE Member
- Posts: 125
- Joined: Sat Apr 02, 2011 11:22 am
- Year and Trim: 2002 SLE
- Location: New Albany, IN
Re: '01 SSEi Motor Mounts
you have a total of 4 mounts.
You have the puck mount that you are familiar with.
You have an "Engine Mount" on the Passenger side,Follow the Big chunk of aluminum that attaches to the engine on the oil pan/upper block to the frame (the engine "hangs" from it...) Can be seen from the wheel well
You have a Trans Mount on the Drivers Side... (Looks ALOT like the Passenger side and hangs from it as well...) Can be seen from the wheel well
You have the rear Trans Mount that mounts to the subframe and is REALLY fun to get to.
You have the puck mount that you are familiar with.
You have an "Engine Mount" on the Passenger side,Follow the Big chunk of aluminum that attaches to the engine on the oil pan/upper block to the frame (the engine "hangs" from it...) Can be seen from the wheel well
You have a Trans Mount on the Drivers Side... (Looks ALOT like the Passenger side and hangs from it as well...) Can be seen from the wheel well
You have the rear Trans Mount that mounts to the subframe and is REALLY fun to get to.
2002 Bonneville SLE 128k miles aka "Frankenbonnie"
Intense PCM w/2004 improved trans shift points/180 fans-stat/+3deg timing advance/DTC inhibit
Transmission Cooler
Upcoming changes - Hi Flow Cat/Exhaust - Cold Air Kit
1993 GMC 'Burb aka "Zombie Assault Vehicle" 230k miles
Intense PCM w/2004 improved trans shift points/180 fans-stat/+3deg timing advance/DTC inhibit
Transmission Cooler
Upcoming changes - Hi Flow Cat/Exhaust - Cold Air Kit
1993 GMC 'Burb aka "Zombie Assault Vehicle" 230k miles