question about what mps i have... EDIT* NEW INFORMATION
-
JEzze
- GXP Member
- Posts: 203
- Joined: Sat Mar 05, 2011 9:43 pm
- Year and Trim: 2000 quicksilver SSEI
- Location: Novi Michigan
- Contact:
question about what mps i have... EDIT* NEW INFORMATION
Ok so I got this mps off a member here. How can I be sure what hub I have. I just bought a intence pulley and it does not fit.the hub is bigger than intence pulley? Any help appreciated ..
Last edited by JEzze on Mon Mar 05, 2012 2:37 pm, edited 1 time in total.
DDM tuning HID 6000k hi/lows and fogz
FWI, 180*tstate / 18 inch enkie wraped with potenza run flats , danturs tuned pcm,
Home made motor mount / autolite 605plugs/beldin performance wires. Hogan 3 inch dp w/ magnaflow hiflo cat, zzp plot and 3.4 smoothflow MpS, trans go shift kit, 10 inch gtablet mounted running torque app.
I have a kr issue please help....
-
01bonneSC
- Certified Bonneville Nut
- Posts: 4938
- Joined: Sat May 24, 2008 5:18 pm
- Year and Trim: 05 Chevy 'Hoe
1997 'maro (3.8L M5)
89 SkiDoo - Location: Sycamore, IL
Re: question about what mps i have
Pics would help.
00Beast wrote:Less off-topic than Lane's Heated Steering wheel, but yeah, back to the topic.
-
JEzze
- GXP Member
- Posts: 203
- Joined: Sat Mar 05, 2011 9:43 pm
- Year and Trim: 2000 quicksilver SSEI
- Location: Novi Michigan
- Contact:
Re: question about what mps i have
Does this help
Last edited by JEzze on Tue Jan 17, 2012 8:00 pm, edited 2 times in total.
DDM tuning HID 6000k hi/lows and fogz
FWI, 180*tstate / 18 inch enkie wraped with potenza run flats , danturs tuned pcm,
Home made motor mount / autolite 605plugs/beldin performance wires. Hogan 3 inch dp w/ magnaflow hiflo cat, zzp plot and 3.4 smoothflow MpS, trans go shift kit, 10 inch gtablet mounted running torque app.
I have a kr issue please help....
-
myfirstbonnie
- Resident Gearhead
- Posts: 5530
- Joined: Mon May 19, 2008 10:19 pm
- Year and Trim: .
2015 Buick Enclave
2013 Buick Regal GS - Location: Hillsboro, Oregon
Re: question about what mps i have
Looks like a smoothflow like I have. http://smoothflowpulleys.com/index.html
Only way to tell would be to take some measurements or to try someone else's pulley.
Only way to tell would be to take some measurements or to try someone else's pulley.
-
00Beast
- Retired Site Developer
- Posts: 20960
- Joined: Tue May 27, 2008 10:30 pm
- Year and Trim: '17 Silverado 1500
- Location: MN/IA
- Contact:
Re: question about what mps i have
Looks like the machined Smoothflow to me.
Bye Bye:
RIP sandrock
RIP sandrock
Sirius wrote:Think about it. You’re tooling down the road in your Prius, knowing full-well that this thing being green is as big a sham as federally mandated ethanol-enriched gas, Russia pulling out of Ukraine, and Obamacare.
-
JEzze
- GXP Member
- Posts: 203
- Joined: Sat Mar 05, 2011 9:43 pm
- Year and Trim: 2000 quicksilver SSEI
- Location: Novi Michigan
- Contact:
Re: question about what mps i have
After taking measurements smoothflow seams to be it. Now the question is who's pulleys can I use
DDM tuning HID 6000k hi/lows and fogz
FWI, 180*tstate / 18 inch enkie wraped with potenza run flats , danturs tuned pcm,
Home made motor mount / autolite 605plugs/beldin performance wires. Hogan 3 inch dp w/ magnaflow hiflo cat, zzp plot and 3.4 smoothflow MpS, trans go shift kit, 10 inch gtablet mounted running torque app.
I have a kr issue please help....
-
00Beast
- Retired Site Developer
- Posts: 20960
- Joined: Tue May 27, 2008 10:30 pm
- Year and Trim: '17 Silverado 1500
- Location: MN/IA
- Contact:
Re: question about what mps i have
Smoothflow's. They're the cheapest new anyways. He makes the pulleys for some other brands too, but idk if they are precisely the same...
Bye Bye:
RIP sandrock
RIP sandrock
Sirius wrote:Think about it. You’re tooling down the road in your Prius, knowing full-well that this thing being green is as big a sham as federally mandated ethanol-enriched gas, Russia pulling out of Ukraine, and Obamacare.
-
JEzze
- GXP Member
- Posts: 203
- Joined: Sat Mar 05, 2011 9:43 pm
- Year and Trim: 2000 quicksilver SSEI
- Location: Novi Michigan
- Contact:
Re: question about what mps i have
Man I do wish I did some research before getting the intence pulley.
Well on thee good side someone will by this 3.5 for ccchhhhhheeaapppp!!
Well on thee good side someone will by this 3.5 for ccchhhhhheeaapppp!!
DDM tuning HID 6000k hi/lows and fogz
FWI, 180*tstate / 18 inch enkie wraped with potenza run flats , danturs tuned pcm,
Home made motor mount / autolite 605plugs/beldin performance wires. Hogan 3 inch dp w/ magnaflow hiflo cat, zzp plot and 3.4 smoothflow MpS, trans go shift kit, 10 inch gtablet mounted running torque app.
I have a kr issue please help....
-
JEzze
- GXP Member
- Posts: 203
- Joined: Sat Mar 05, 2011 9:43 pm
- Year and Trim: 2000 quicksilver SSEI
- Location: Novi Michigan
- Contact:
Re: question about what mps i have
Man I do wish I did some research before getting the intence pulley.
Well on thee good side someone will by this 3.5 for ccchhhhhheeaapppp!!
Man I got to quit that
... sorry bout that double post.
Well on thee good side someone will by this 3.5 for ccchhhhhheeaapppp!!
Man I got to quit that
... sorry bout that double post.
Last edited by JEzze on Tue Jan 17, 2012 9:37 pm, edited 1 time in total.
DDM tuning HID 6000k hi/lows and fogz
FWI, 180*tstate / 18 inch enkie wraped with potenza run flats , danturs tuned pcm,
Home made motor mount / autolite 605plugs/beldin performance wires. Hogan 3 inch dp w/ magnaflow hiflo cat, zzp plot and 3.4 smoothflow MpS, trans go shift kit, 10 inch gtablet mounted running torque app.
I have a kr issue please help....
-
willwren
- Retired Admin
- Posts: 65489
- Joined: Sun May 18, 2008 11:07 pm
- Year and Trim: .
93 SSEi
95 SLE (SC)
97 Buick LeSabre - Location: Oregon WCBF'04, '05, '06, '07, '08, '09, '10, '11 Survivor
- Contact:
Re: question about what mps i have
You also need to spell INTENsE correctly.
Click here for mod list for both cars
93 SSEi, 95 SLE (supercharged) 97 Buick LeSabre Limited
PontiacDad at WCBF '04: Cruise control? That's like surrendering!
Comprehensive guide to troubleshooting, rebuilding, and modifying Eaton Superchargers
-
JEzze
- GXP Member
- Posts: 203
- Joined: Sat Mar 05, 2011 9:43 pm
- Year and Trim: 2000 quicksilver SSEI
- Location: Novi Michigan
- Contact:
Re: question about what mps i have
Thanks for the correction ..... Atleast u new what i was trying to say.
If u could just follow me around and correct all my spelling that would be great. I really suck at spelling . Thanks
If u could just follow me around and correct all my spelling that would be great. I really suck at spelling . Thanks
Last edited by JEzze on Wed Jan 18, 2012 1:36 pm, edited 1 time in total.
DDM tuning HID 6000k hi/lows and fogz
FWI, 180*tstate / 18 inch enkie wraped with potenza run flats , danturs tuned pcm,
Home made motor mount / autolite 605plugs/beldin performance wires. Hogan 3 inch dp w/ magnaflow hiflo cat, zzp plot and 3.4 smoothflow MpS, trans go shift kit, 10 inch gtablet mounted running torque app.
I have a kr issue please help....
-
JEzze
- GXP Member
- Posts: 203
- Joined: Sat Mar 05, 2011 9:43 pm
- Year and Trim: 2000 quicksilver SSEI
- Location: Novi Michigan
- Contact:
Re: question about what mps i have
Just a update...
Ok so i took the advice of members and ordered a smoothflow pulley it just showed up here and this pulley is too big . Does any one have a smoothflow mps that coukd measure the hub so i can stop ordering the wrong one .. lol this is pulley #2... help guys
Any one no nate at smoothflow. I'm wondering if he excepts returns.... not so likly!!!
Ok so i took the advice of members and ordered a smoothflow pulley it just showed up here and this pulley is too big . Does any one have a smoothflow mps that coukd measure the hub so i can stop ordering the wrong one .. lol this is pulley #2... help guys
Any one no nate at smoothflow. I'm wondering if he excepts returns.... not so likly!!!
Last edited by JEzze on Mon Mar 05, 2012 11:51 am, edited 2 times in total.
DDM tuning HID 6000k hi/lows and fogz
FWI, 180*tstate / 18 inch enkie wraped with potenza run flats , danturs tuned pcm,
Home made motor mount / autolite 605plugs/beldin performance wires. Hogan 3 inch dp w/ magnaflow hiflo cat, zzp plot and 3.4 smoothflow MpS, trans go shift kit, 10 inch gtablet mounted running torque app.
I have a kr issue please help....
-
yourgrandma
- Certified Bonneville Nut
- Posts: 2425
- Joined: Mon May 26, 2008 6:56 pm
- Year and Trim: '02 SSEi
Re: question about what mps i have
The best thing to do would be to measure the bolt hole spacing and ask whos hub you have.
02 SSEi-Turning money into tire smoke, very efficiently.
-
JEzze
- GXP Member
- Posts: 203
- Joined: Sat Mar 05, 2011 9:43 pm
- Year and Trim: 2000 quicksilver SSEI
- Location: Novi Michigan
- Contact:
Re: question about what mps i have
The hub is one inch od. I have tried INTENSE and smoothflow . I have sent emails to nate at smoothflow as well as zzp.
IF I REMEMBER Correctly intense pulley hub hole was not big enough. and the smoothflow pulley hub hole is just a bit big.
WHO ELSE MAKES A MPS
I will toss this thing out and just by a new one.
IF I REMEMBER Correctly intense pulley hub hole was not big enough. and the smoothflow pulley hub hole is just a bit big.
WHO ELSE MAKES A MPS
I will toss this thing out and just by a new one.
Last edited by JEzze on Mon Mar 05, 2012 7:20 pm, edited 2 times in total.
DDM tuning HID 6000k hi/lows and fogz
FWI, 180*tstate / 18 inch enkie wraped with potenza run flats , danturs tuned pcm,
Home made motor mount / autolite 605plugs/beldin performance wires. Hogan 3 inch dp w/ magnaflow hiflo cat, zzp plot and 3.4 smoothflow MpS, trans go shift kit, 10 inch gtablet mounted running torque app.
I have a kr issue please help....
-
00Beast
- Retired Site Developer
- Posts: 20960
- Joined: Tue May 27, 2008 10:30 pm
- Year and Trim: '17 Silverado 1500
- Location: MN/IA
- Contact:
Re: question about what mps i have... EDIT* NEW INFORMATION
IIRC Nate changed his design at one point. Could you possibly have one of his older pullies?
Did you buy your MPS from Larz01?
Did you buy your MPS from Larz01?
Last edited by 00Beast on Tue Mar 06, 2012 12:02 am, edited 1 time in total.
Bye Bye:
RIP sandrock
RIP sandrock
Sirius wrote:Think about it. You’re tooling down the road in your Prius, knowing full-well that this thing being green is as big a sham as federally mandated ethanol-enriched gas, Russia pulling out of Ukraine, and Obamacare.
-
JEzze
- GXP Member
- Posts: 203
- Joined: Sat Mar 05, 2011 9:43 pm
- Year and Trim: 2000 quicksilver SSEI
- Location: Novi Michigan
- Contact:
Re: question about what mps i have... EDIT* NEW INFORMATION
I will have to check. I think so. As far as the style size Hehopefully can still supply this..
Edit* after some research I got this system from zltful. I asked him if he got it from larz01.. I'm just ring to figure out who makes a hub that's 1 inch OD..
Ok
Edit* after some research I got this system from zltful. I asked him if he got it from larz01.. I'm just ring to figure out who makes a hub that's 1 inch OD..
Ok
Last edited by JEzze on Tue Mar 06, 2012 12:30 pm, edited 1 time in total.
DDM tuning HID 6000k hi/lows and fogz
FWI, 180*tstate / 18 inch enkie wraped with potenza run flats , danturs tuned pcm,
Home made motor mount / autolite 605plugs/beldin performance wires. Hogan 3 inch dp w/ magnaflow hiflo cat, zzp plot and 3.4 smoothflow MpS, trans go shift kit, 10 inch gtablet mounted running torque app.
I have a kr issue please help....
-
JEzze
- GXP Member
- Posts: 203
- Joined: Sat Mar 05, 2011 9:43 pm
- Year and Trim: 2000 quicksilver SSEI
- Location: Novi Michigan
- Contact:
Re: question about what mps i have... EDIT* NEW INFORMATION
After talking with nate from smoothflow, we come to the conclusion that this is a first gen hub. I sent the pulley back to him and he will cut me an old style. Pulley.. so this time next week I should have my pulley back as well as my eBay headers... I hope my mods will support the 3.5.
DDM tuning HID 6000k hi/lows and fogz
FWI, 180*tstate / 18 inch enkie wraped with potenza run flats , danturs tuned pcm,
Home made motor mount / autolite 605plugs/beldin performance wires. Hogan 3 inch dp w/ magnaflow hiflo cat, zzp plot and 3.4 smoothflow MpS, trans go shift kit, 10 inch gtablet mounted running torque app.
I have a kr issue please help....
-
Alpine_jake
- SLE Member
- Posts: 78
- Joined: Sun Feb 10, 2013 12:56 pm
- Year and Trim: 2003 SLE
- Location: Winona, MN
Re: question about what mps i have
JEzze wrote:Thanks for the correction ..... Atleast u new what i was trying to say.
If u could just follow me around and correct all my spelling that would be great. I really suck at spelling . Thanks
knew**** sorry had to lol
l67 swap; 3'DP, power log, CAI, 10.5 wires, 3.5" pulley, autolite 104s, canned tune, 180 thermo, 2 Alpine type Xs, ARC Audio XDi 2000, Big three-0/1 , couple Red Tops, alpine x303, cleared lights, custom trunk.
-
00Beast
- Retired Site Developer
- Posts: 20960
- Joined: Tue May 27, 2008 10:30 pm
- Year and Trim: '17 Silverado 1500
- Location: MN/IA
- Contact:
Re: question about what mps i have... EDIT* NEW INFORMATION
Correcting grammar in a year old thread? SMH...
Bye Bye:
RIP sandrock
RIP sandrock
Sirius wrote:Think about it. You’re tooling down the road in your Prius, knowing full-well that this thing being green is as big a sham as federally mandated ethanol-enriched gas, Russia pulling out of Ukraine, and Obamacare.