installing a hitch
installing a hitch
if i install a trailer hitch, would i need to install a transmission cooler? and how many pounds can my car tow?
- Bugsi
- Resident Gearhead

- Posts: 2405
- Joined: Wed May 21, 2008 7:36 pm
- Year and Trim: (RIP 10/31/15) 1997 SE
05 Mercedes S500 4Matic - Location: Sunnyvale, CA
Re: installing a hitch
It just depends on what you plan to pull. (I don't know the maximum tow weight, I'll let others chime in on that.)
I have a hitch, but the only thing that I connect to it is my bike rack. For something like that, no transmission cooler is needed. If you're only planning to very occasionally pull light weights over short distances with no hills, you don't *have* to install a transmission cooler. Your transmission already has lines that go to part of your radiator for cooling.
But having said that, the stock transmission can really benefit from an outboard transmission cooler even without a hitch if you're never towing anything. As they're relatively inexpensive and can even be installed yourself if you're moderately handy with tools, it is actually a rather popular upgrade project around here. I'm sure several others can point you to their "how to" articles if you're interested.
If you do any mountain driving you can observe your coolant temp rise when you're going up long grades. The heat is actually coming from the transmission, soaking into your engine's cooling system through the small radiator cooling passage. It's doing its job, transferring excess heat to the coolant so it can be shed through the radiator, but this can cause you to run with elevated temps over some period of time if you're in the mountains for a while, compounded if the outside ambient temperature is hot. Since we've absolutely seen heat related failures of gaskets and plastic manifolds, adding an external transmission cooler can give you some real protection to your engine (not to mention your transmission) even if you never tow anything.
So it's a good upgrade idea, even if you don't tow. If you do plan on towing any sort of weight over long hauls or hills, then absolutely install a cooler.
I have a hitch, but the only thing that I connect to it is my bike rack. For something like that, no transmission cooler is needed. If you're only planning to very occasionally pull light weights over short distances with no hills, you don't *have* to install a transmission cooler. Your transmission already has lines that go to part of your radiator for cooling.
But having said that, the stock transmission can really benefit from an outboard transmission cooler even without a hitch if you're never towing anything. As they're relatively inexpensive and can even be installed yourself if you're moderately handy with tools, it is actually a rather popular upgrade project around here. I'm sure several others can point you to their "how to" articles if you're interested.
If you do any mountain driving you can observe your coolant temp rise when you're going up long grades. The heat is actually coming from the transmission, soaking into your engine's cooling system through the small radiator cooling passage. It's doing its job, transferring excess heat to the coolant so it can be shed through the radiator, but this can cause you to run with elevated temps over some period of time if you're in the mountains for a while, compounded if the outside ambient temperature is hot. Since we've absolutely seen heat related failures of gaskets and plastic manifolds, adding an external transmission cooler can give you some real protection to your engine (not to mention your transmission) even if you never tow anything.
So it's a good upgrade idea, even if you don't tow. If you do plan on towing any sort of weight over long hauls or hills, then absolutely install a cooler.
PontiacDad at WCBF `08: "By any chance, was his name. . .Radomir?"
R.I.P. 10/31/15: 1997 SE: "Silver Shadow"
`05 Mercedes S500
R.I.P. 10/31/15: 1997 SE: "Silver Shadow"
`05 Mercedes S500
- lowrider0308
- Posts like a Northstar

- Posts: 2255
- Joined: Wed May 21, 2008 8:50 pm
- Year and Trim: 2006 Chevy Silverado LT
1989 Camaro RS LT1 - Location: North Florida
Re: installing a hitch
The biggest question is how many pounds can your car stop, not how many it can get rolling or support before the suspension bottoms out. What do you plan on towing?

--2006 Silverado LT-3/3 RCX Lift, Bilstien 5100's, CAI, Exhuast, BFG A/T's,
Tuners Inc. dynotune, Aeroforce Interceptor, Kicker 10" TC, iSimple Interface
--1989 Camaro RS-LT1/700r4 drivetrain swap, Corvette trans internals w/2200 stall,
rebuilt engine with LT4 cam
Re: installing a hitch
Riding lawn mower
-
00Beast
- Retired Site Developer

- Posts: 20960
- Joined: Tue May 27, 2008 10:30 pm
- Year and Trim: '17 Silverado 1500
- Location: MN/IA
- Contact:
Re: installing a hitch
How far? I'd recommend a trans cooler anywhere. If you plan on going more than 5 miles, or a lot in the city while towing then I'd say yes.
Bye Bye:

RIP sandrock

RIP sandrock
Sirius wrote:Think about it. You’re tooling down the road in your Prius, knowing full-well that this thing being green is as big a sham as federally mandated ethanol-enriched gas, Russia pulling out of Ukraine, and Obamacare.
Re: installing a hitch
About 20 miles. Trans cooler easy to install? would i need to remove the current radiator lines?
- willwren
- Retired Admin

- Posts: 65489
- Joined: Sun May 18, 2008 11:07 pm
- Year and Trim: .
93 SSEi
95 SLE (SC)
97 Buick LeSabre - Location: Oregon WCBF'04, '05, '06, '07, '08, '09, '10, '11 Survivor
- Contact:
Re: installing a hitch
Do a search. There have been a couple good topics on recent installs.
Even with just an empty trailer, when you install a hitch, you install the PROPER cooler.
Even with just an empty trailer, when you install a hitch, you install the PROPER cooler.

Click here for mod list for both cars
93 SSEi, 95 SLE (supercharged) 97 Buick LeSabre Limited
PontiacDad at WCBF '04: Cruise control? That's like surrendering!
Comprehensive guide to troubleshooting, rebuilding, and modifying Eaton Superchargers


