Thanks again, you guys are always a big help. :beerchug:

It came out pretty easy, the cover gave me a bit of a hard time,but it wasn't to bad.

[quote="Bob Dillon"]I just used a long screwdriver to knock the nipples and hoses off the firewall side for disassembly. Grease the nipples on the new ...

My heating core *shoot* the bed, i got a new one , but before i rip apart the whole dash i wanted to check with u guys. Does anyone now exactly whare it is located? any help will be appreciated ty.

Ok ill take a look at it tomorrow and, post what i discover

Thanks guys

My tranny's got a leak... I put a quart, sometimes 2 a week, depending on how much i drive.
The thing is it only leaks when it's running. I put some lucus in it, helped some but not much...
Any ideas would be great ty

cool, ty . yes its a 3 wire

I wanna replace my O2 sensor. Does anyone know of a good web site,or auto parts store to buy one? The parts stores by me(Advance,Autozone and, Napa) only carry bosch.(I was reading a post awhile back and one of the admins told the guy under no circumstance buy a bosch)...Any help will be much ...

Ty.

Is it hard to drop the tank? Or is it just some bolts and lines?

Turns out thats not the problem. #-o I filled up the tank,put a can of seafoam in and, it ran fine the amp gauge never dropped....

until the gas gauge dropped down to the line b4 E. Then the amp gauge dropped again and,she ran like *shoot*... any ideas??


P.S.
As long as i keep it above that ...

What about OE? (I was gonna get TRW but advance doesn't sell them anymore and, they were all out of moog)

Ty, that will help,its just what i need.

Any suggestions on a good brand???

My friend (Blazz) thinks i offended you when i said ''The only why to learn is to do it yourself.''
If there was any misunderstanding i was replying to...

''There are many dangers to this and if it's your first repair I recommend you pay someone to do it. ''

P.S.
sorry if i offended anyone

I also want to add that both tires shake.
(But the driver side is worse)

Ty for the help.
But what rivets are u talking about???(the only why to learn is to do it yourself)

sounds like the tranys *fook*

ty. sorry

I got a pretty bad shake in my front end, at first i thought it was the stabilizing arms(one of the bolts has been broken for awhile the other i snapped when i changed my trans) anyways i jacked it up and shook the tire and i can see the lower ball joint moving.I haven't done those yet,any tips will ...

The tranny has 167,000 miles(if the odomiter on the car i got it out of was right)

as always u guys are a big help. ty

Sweet ride
How long did that take to build?