I was told that the connector there is for the ABS system.

What about the wacky instrument cluster ie. fuel, temp, and speedo guages?

It's possible that they are. Mine were not glued down at all and if they were the glue wore off but there was no evidence of any glue.

This is what harofreak00 told me for my 04 SE.

There are 4 clips on the back of the upper seat back than you can release with a long flat blade screwdriver, Just push down on them and they will pop out. Then use an 18mm socket to remove the bolts at the bottom. Remove seat section.

Use a pry tool ...

Thanks wake!

please let me know if these links do not work

[img][IMG]http://i1128.photobucket.com/albums/m485/taylorman2004/05-04-2011082132PM.jpg[/img][/img]
As you can see that there are the 2 yellow and the 1 red wire this pic is off the harness adapter.
[img][IMG]http://i1128.photobucket.com/albums/m485/taylorman2004/05-04-2011083711PM.jpg[/img][/img ...

hi there sorry so late getting back on this subject here. There is 2 yellow wires and 1 red wire coming of the harness adapter. The adapter and the HU have consistent wires to run together. The wires are not labeled at all either. I will post a pic of what I'm talking about here in a bit.

Thank you!

thanks for the input on this issue. I will try checking the leads again. The harness adapter has to constant leads but the radio only has one. Also there are more ground wires too. I tried initially hooking up both the constants to the one constant hot wire and all the grounds together to make sure ...

I'm replacing the factory stereo in my 04 SE cuz the original quit playing cd's and numerous lights are burnt out on it. Now I hooked up the new stereo without any issues :banana: . But when I turned the car on I have NOTHING! All the wires are hooked up correctly (kinda hard to screw that up) using ...

yes it is a small world...lol. Anyway I am going to replace the stereo now and the connection thing I bought at walmart will not fit. What is it that I would need to connect this thing up? I found a wire kit on amazon but I was wondering if the chimes will be affected by this? And if so where could ...

ok got them out now to replace the old with the new! and then put it back together again. Thanks so much for your help

I also see that your from Browerville. I live just south of Melrose.

those 18mm bolts are the ones at the seatbelts correct? Also what are the C-pillars?

Hello, my name is Chris. I have an 04 bonneville that the OE speakers have blown out. I am TRYING to replace these but have run into a couple snags. I know that I have to take out the upper portion of the back seat. I am not 100% sure on how this is done. The engineer that thought of this way to put ...