Rolling down the highway all of a sudden she fell out of gear as if I shifted into neutral. Pulled to the side of the road, fluid level is good, managed to limp to the nearest off ramp and call Triple A. As I was limping I'd try to get her up to speed and it just kept slipping out no matter if I put ...

Hey all, wipers have been working fine then all of a sudden the fuse blew when I turned them on and every fuse I replace blows. Where do I begin to troubleshoot? I need to get home and am stuck on the side of the road 25 miles from home.

Sorry this reply is so late but yes it worked perfectly!

Will get that done and check back with the results! Thanks all!

I have some black/grayish sludge accumulating in my overflow tank and on the radiator cap. Where's it coming from, how bad is it, and how do I begin to track it down to fix it? As always any and all help is much appreciated!

Did you get the job done? What tips do you have? I'm due to give this a try...

Turns out the relay was toast. Replaced the fan and relay and all is good with the cooling fans.

Ended up getting one from the JY, needed the wheel cylinder anyways....

Im up north in Snohomish!

I believe so, From the back I've tried sanding away as much as I can but cant get anything close to the crease. It looks as if it's welded. I was thinking a soak in some mineral spirits, or PB Blaster might help?

Can you buy replacements or am I gonna have to head to the JY? The issue with mine currently is my hub is stuck in the plate. Got the hub out of the spindle but cant get it out of the plate... Mind you this is the first replacement of the hub and I'm at 260k+ I was thinking of using a dremmel and ...

So turns out the fan on the passenger side is toast, tried to pumper it and no movement. Disconnected and removed it until I can run to the JY to get a replacement but now the other fan wont turn off unless I remove the maxi fuse...is that supposed to happen when only one fan is connected?

just noticed I was running hot and they werent kicking on, Found a screwdriver wedged between the fan and the radiator on the passenger side :???: havent seen that one kick on yet but the bigger one on the drivers side has. Replaced the fuse before leaving work one night and by the time I finished ...

What could be causing this to happen?

Haven't tried it yet but will soon and I'll chime in then..

MattStrike, You're a genius! Thanks!

They keep slipping off the head of the bolt Has anyone ever used the eopxy they sell that says it sets "hard as steel"? I was thinking of using some of that to set the torx bit into place and trying that route. Dont have access to any welding tools at the moment.

Yeah you're right, the torx head is stripped out... as for your solution...Thats what I was thinking about, welding something to the head and wrenching it out that way....Thanks!

Hate diggin this post outta the dirt but....... I unfortunately stripped one of mine too but have no extractor sets or anything of the sort. What's the best way to go here to get that bolt outta there?

This was easier than I thought. I had the two screws bottom right corner by the speaker, one behind the handle (Torx), the other behind the power mirror switch (Torx). Once those were out as previously stated just popped the panel off, had a little trouble with the top trim sticking to the wondow ...