The 02 SSEi that I recently purchased has a few issues with the front 2 windows...

The front driver side makes a horrible popping sound when I push the switch to make it go down, but goes down with no issue. The passenger side does not make any noises, just if it goes all the way down, it gets stuck and I have to wait a few moments before either of the switches will put it back up... kind of confused.

Any and all help greatly appreciated, thanks!

_________________

my drivers window makes kind of a pop noise but seems to work fine.

As for the window not going back up... is it when you use the "AUTO" down feature? if you don't use the auto down will it go down all the way and back up fine? My monte did the same thing... replaced the regulator (has a internal breaker in it that has to reset... as it was described to me) and repalced the switch (NEW GM OEM) and no fix... its like the switch says go down and it doesnt try to stop when its down... I used a window switch from a friends Lumina and works perfect... not sure why.. something i gave up figuring out so i don't do auto down all they way anymore.

S

_________________
Shane "RedZMonte"
2004 Z16 Z06: Virgin
2000 SSEi: Kenwood DDX512, 3.25" MPS, ZZP DP, PLog, Puck Mount, NGK TR7's, DHP Tuned
1995 Monte Z34: T04e "60" turbo, 42.5# injectors, Borla Catback, OBDII swap, DHP Tuned, Much more...

Driver's sounds like the regulator/cable going/being bad, not sure about the passenger side...

_________________
Bye Bye:

RIP sandrock

Yeah the driver side makes a pop sound then sounds really noisy (loud motor or something) as its going down. and i did notice if i dont do the express down the passenger window will go back up.

_________________