Page 1 of 2
CAI
Posted: Thu Jul 15, 2010 4:31 am
by Sadden
One of these.
Replace the filter with a good one.
And build a box.
http://cgi.ebay.ca/1992-1993-1994-1995- ... 43a057a9aa
What do you think.
All id be buying it for is the pipe and silicone adapters..
Re: CAI
Posted: Thu Jul 15, 2010 4:36 am
by Sadden
And i suspect most of you are going to crucify it and scream FWI but please dont.
I want to know if the pipe and silicone adapter will be any good.
And if the pipe will work with IAT
Re: CAI
Posted: Thu Jul 15, 2010 9:15 am
by J Wikoff
The parts would probably work fine. The rice pipe at Autozone might be longer and fit better, though. The IAT looks like it would work fine, but I might like it closer to the filter.
Re: CAI
Posted: Thu Jul 15, 2010 10:14 am
by willwren
I agree. It's a bit too much on the short side, and the IAT isn't in a good location.
Re: CAI
Posted: Thu Jul 15, 2010 12:54 pm
by labonnevillastrangiato
If you buy a K&N RX-4750 filter and ditch the one in the picture, there is a hole in the back of the K&N filter for the IAT.
Adam
Re: CAI
Posted: Thu Jul 15, 2010 1:13 pm
by willwren
The 4750 hole will have to be enlarged.
Re: CAI
Posted: Thu Jul 15, 2010 2:34 pm
by Sadden
I asked about a ricepipe at a couple local places and they said they had no idea what i was talking about.
Gonna have to look for a P/N
Re: CAI
Posted: Thu Jul 15, 2010 2:38 pm
by J Wikoff
There's a part number here. "Rice pipe" was coined by this forum. Parts stores will be clueless. IIRC, it's made for a Civic.
Re: CAI
Posted: Thu Jul 15, 2010 2:48 pm
by harofreak00
Re: CAI
Posted: Thu Jul 15, 2010 3:06 pm
by Sadden
Why thank you very much Andrew.
No autozone in GP.
went to napa , pats auto , street n strip.
This will help alot thanks.
Re: CAI
Posted: Thu Jul 15, 2010 3:14 pm
by harofreak00
Re: CAI
Posted: Thu Jul 15, 2010 3:55 pm
by Sadden
Now that i have a P/N and a make Street n Strip can get it for me.
I would need to get a 4" to 3" inner diameter reducer right?
Re: CAI
Posted: Thu Jul 15, 2010 9:14 pm
by rrounds
The intake pipe should never be smaller than the T/B. Mine goes from 6" i.d. at the filter down to 3 1/2" i.d. at the T/B. Make your own and have fun.
ROD
Re: CAI
Posted: Thu Jul 15, 2010 9:29 pm
by SSEimatt93
I would try the Canadian Tire in Grande Prairie.
Re: CAI
Posted: Fri Jul 16, 2010 4:38 am
by Sadden
When i get paid i am going with this.
http://www.autozone.com/autozone/catalo ... tId=945343
LOL i know i am gonna get a ribbing from you guys cause i am a K&N hater but......
Convenience.
Re: CAI
Posted: Fri Jul 16, 2010 1:43 pm
by 01bonneSC
Thats *dang* expensive. Intense is cheaper.
Re: CAI
Posted: Fri Jul 16, 2010 8:12 pm
by willwren
INTENSE is cheaper, and provides far better true cool air from OUTSIDE the engine bay.
Re: CAI
Posted: Fri Jul 16, 2010 8:12 pm
by willwren
INTENSE is cheaper, and provides far better true cool air from OUTSIDE the engine bay.
Re: CAI
Posted: Fri Jul 16, 2010 8:40 pm
by viper8907
Yea I know you don't want us to scream FWI, but if you're going to spend that much you'd be crazy to not get a FWI instead....
Re: CAI
Posted: Sat Jul 17, 2010 3:04 am
by Sadden
The FWI is 180 American.
Convert that to Canadian and add cross border shipping.
I got quoted 190 for the Apollo.