hid

This is your place for alarms, remote starters, to brag about your system, exaggerate your db levels, or simply ask questions for stock or aftermarket audio. No Flames! (except from roasted amps)
Post Reply
agape1983
LE Member
Posts: 5
Joined: Sun Aug 10, 2008 4:23 pm
Year and Trim: 93 ssei

hid

Post by agape1983 »

does anyone know where i can get 5k-6- hid for my 9006hb4 bulbs and also for my foglights.anything helps
Top
User avatar
88bonnsse
Posts like a Northstar
Posts like a Northstar
Posts: 1634
Joined: Thu May 22, 2008 10:08 am
Year and Trim: 1988 sse - 80,000 on the clock and my first car...

1995 se wit da sle package- 120,000 on the clock and ticking stronger then ever...
Location: allentown pa

Re: hid

Post by 88bonnsse »

agape1983 wrote:does anyone know where i can get 5k-6- hid for my 9006hb4 bulbs and also for my foglights.anything helps

ebay is your best friend...
Top
User avatar
robjr69
SSE Member
SSE Member
Posts: 139
Joined: Sat May 24, 2008 11:45 pm
Year and Trim: 1996 Pontiac Bonneville SE

Re: hid

Post by robjr69 »

I got mine on ebay. they are 8000k Hid conversion kit for 60.00..they are awesome. just type in 9006 hid conversion....good luck
Top
blackout
SLE Member
SLE Member
Posts: 37
Joined: Mon May 26, 2008 4:14 pm
Year and Trim: 96 Bonneville SE
Location: Cincinnati Oh

Re: hid

Post by blackout »

I will tell you to be ready for some issues one you do go HID, I had to wire a resistor to get them to both kick on at the same time. The care sends more than the ballast needs so do your research.
Image

96 SE Pioneer AVHP5700 head unit(ipod connection) new are intake, clear corners, new foglights. HID head lights (Soon to have new rims) as soon as it gets warm enough.
Top
Mickman
SLE Member
SLE Member
Posts: 69
Joined: Wed May 28, 2008 5:02 pm
Year and Trim: 1997 SSEi

Re: hid

Post by Mickman »

Personally I've never had big issues with HID's. I've had them on two cars, a 95Ei and a 97Ei. The only problem on the 95 was that it showed up on the DIC and it was annoying. For the 97 the resistor for the DRLs had to come out because it wasn't getting enough power in the daytime unless you turned the lights on manually.

Hope that helps!
Image
Top
Post Reply

Return to “Audio (and aftermarket electronics)”