My traction control button has fallen out of its socket into the center console. I can lift up the console top, and see that the whole assembly, still connected to the wire is just sitting down there next to the shifter mechanism. I also notice there's some sort of screw hole on the side of the button's box. Should I be looking for a screw to put it back in, or should I just use superglue?
Thanks!
Traction Control Button
-
brownishSLE
- SE Member
- Posts: 18
- Joined: Tue Sep 08, 2015 10:46 am
- Year and Trim: 2000 SLE
Traction Control Button
brownishSLE
"Family heirloom" Brown-on-brown 2000 SLE
It's not winter anymore.
I'll get a new photo up
soon.
"Family heirloom" Brown-on-brown 2000 SLE
It's not winter anymore.
I'll get a new photo up
soon.
-
2003 SSEi
- Posts like an L67
- Posts: 1382
- Joined: Fri Aug 01, 2008 11:57 am
- Year and Trim: 2003 SSEi.
LOTS of Mods
Re: Traction Control Button
the button has 2 tabs at the bottom (facing the rear of the console) and a screw (facing the front). Chances are one or the other has broken. You would have to remove the center console piece and see whats broken. You might be able to insert a larger screw (its actually a Torx T10) I have repaired a few Heated Seat and Traction screw holes on a few Bonneville Consoles