so I installed some interior LED tubes replacing the LED strips that I did have installed and it keeps blowing the fuse. I've got it wired to the front cigarette lighter and to a toggle switch.
Any ideas why it keeps blowing the fuse?
Side note if I put a fuse in they turn on, but when I flip the toggle switch to turn them off that's when the fuse blows.
Interior LED Tubes
-
04BonnieSE
- SE Member
- Posts: 10
- Joined: Sat Jul 27, 2013 11:54 pm
- Year and Trim: 2004 SE
Interior LED Tubes
2004 Bonneville SE, 176k Miles
-
04BonnieSE
- SE Member
- Posts: 10
- Joined: Sat Jul 27, 2013 11:54 pm
- Year and Trim: 2004 SE
Re: Interior LED Tubes
It was the same switch I used for the LED strips.. But I'll try an get another switch to check.
2004 Bonneville SE, 176k Miles
-
1oldman
- Certified Bonneville Nut
- Posts: 3975
- Joined: Tue May 04, 2010 11:21 pm
- Year and Trim: 2017 Hyundai Santa Fe Sport
- Location: Lone Star State
Re: Interior LED Tubes
I agree with "xxdabroxx", probably a defective switch or possibly wiring on the back side of the switch. - BC
In Memory of Brad - 1/21/1977 .. 10/23/2013 ...... Aaron - 1977 .. 2017 .....
2017 Hyundai Santa Fe Sport ..... 1992 Bonneville SSE 1SB 170 HP L27 4T60E retired/sold to MattStrike ..... 2005 Bonneville SE 1SC 205 HP L36 4T65E - retired/salvage yard ..... PBCF user 2321
2017 Hyundai Santa Fe Sport ..... 1992 Bonneville SSE 1SB 170 HP L27 4T60E retired/sold to MattStrike ..... 2005 Bonneville SE 1SC 205 HP L36 4T65E - retired/salvage yard ..... PBCF user 2321