subframe bushing question

[mckeddie]

My subframe bushings are completely gone in my 95. By gone i mean only the drivers rear is about half there, the other 3 are completely mia. I found some for a 94 to 96 grand prix a guy had bought but never used for cheap. Are these the same as my car will need or do i need to just bite the bullet and order from gm?

Im new to these cars. I just picked this up for a work car the other day for cheap. Already did the upper intake today.

I cant not screw with a car and im already looking for mods to do.

Thanks
Greg

[allanb]

i had same problem with mine. i went to a junk yard and got some off a cadillac sub frame and they fit fine. i believe they are all about the same .i replaced all 4 rears and only costed me about $20.

[mckeddie]

Were they pretty easy to remove or did you just cut the bolts

[allanb]

the bushings from the junk yard were off subframes that were just laying around ,so they were easy to get. the bolts on my car i took out, i didnt need to cut them although they were almost rusted in half. cuting them would have made more work since the nut is inside the body

[95naSTA]

I would stick to H-bodies only for the bushings.

[nhengineer15]

My subframe bushings are completely gone in my 95.Greg

Check this out. It's a booklet of instructions on how do do the job and where to get the parts.

http://gizmoplans.com/gm-h-body-sub-frame-repair