SSE Cluster in a 94 SE?
- Blue_Bonne
- SLE Member

- Posts: 35
- Joined: Sun Aug 29, 2010 12:39 am
- Year and Trim: 1994 SE
- J Wikoff
- Administrator

- Posts: 17080
- Joined: Mon May 19, 2008 7:01 pm
- Year and Trim: 1992 SSE
2009 G8 GT - Location: Central Illinois
- Contact:
Re: SSE Cluster in a 94 SE?
There might be some wiring changes. Most of it would probably work fine. However, I don't know how the DIC will react to the lack of bulb moniter wiring. I think it would constantly tell you all the bulbs are out, and the hood is open, and maybe the doors... There's probably a way around it by wiring some grounded leads into the harness.

WHITE WHINE - 1992 SSE Supercharged 236.26 ci (.040 Over) 15.090 at 90.2 MPH on old engine w/ slipping trans & melted O2 sensor - Gen 3 M62 and matching TB, Gen 2 Pully, Zillamotorsports Ported LIM, YT 1.72 Roller Rockers, SII FPR & Injectors, Hypertech Thermomaster chip w/ 160 Thermo, TransGo Shift Kit, Infinity/Pioneer Speakers & a 10" Alpine Type R Sub, all the watts, 140 amp Alternator, Ricepipe CAI w/ heatshield, Pilot Angel Eye Foglights, Clear Corners, '02 17" Chrome Bent 5's, Magnaflow F-Body Muffler and Hi-flo Cat, Ceramic Coated Ported Exhaust Manifolds, Fan Override, Monroe Reflex struts, red calipers
2009 G8 GT - Sport Red Metallic, loaded, SOLO Axlebacks, Rotofab Intake, Tuned, autodim mirror, removed intake manifold cover, HSV GTS triple gauge pod, two tone red-hot shifter and HSV SuperSport steering wheel, GXP rear sway bar and diffuser, 3.45 diff and various Camaro suspension bits, LED Taillights
- Blue_Bonne
- SLE Member

- Posts: 35
- Joined: Sun Aug 29, 2010 12:39 am
- Year and Trim: 1994 SE
Re: SSE Cluster in a 94 SE?
o ok and i jus thought about the gears aren't on it either plus i have a 94 se with the shifter on the column... it may not work

- Blue_Bonne
- SLE Member

- Posts: 35
- Joined: Sun Aug 29, 2010 12:39 am
- Year and Trim: 1994 SE
Re: SSE Cluster in a 94 SE?
o ok and i jus thought about the gears aren't on it either plus i have a 94 se with the shifter on the column... it may not work


