Just got my fresh tint...I added a pic

[gxp937]

But now none of my driver door switches work. All my other doors work fine! Can somebody help me before I go back to the tint shop to raise hell!! ??:angry4:

[bonnevillain]

they just forgot to re-connect the wiring harness in the door most likely. I would just pull the panel off and re-connect it, but that may be harder on a GXP? idk.

[00Beast]

No, I'm sure it's the same.

[GXP_vince]

But now none of my driver door switches work. All my other doors work fine! Can somebody help me before I go back to the tint shop to raise hell!! ??:angry4:

Take it back make them use their time.

[gxp937]

sorry its from my camera phone.

[swampthing]

Take it back make them use their time.

X2!

tint looks sharp what % is it?

[gxp937]

I checked my plug and it was plugged in. So what else can it be. If its the driver door module. I priced one at the dealer and they said $335

[swampthing]

if it worked before, take it back to them and tell them whats up they should fix it or pay the cost

[olblueeyesbonne]

How long have you had it since you picked it up from the tinter? They might've disconnected the switch or the module to prevent you from rolling the windows down while the tint cures. The guy I had tint my windows puts a piece of tape over the window switch the says "TINT CURING UNTIL _________" and he writes the date when the tint will be cured by (3 days later). That way if in an emergency the person can open the window, but will be reminded if they forgot about the verbal warning that opening the window in the firt 72 hrs voids warranty on labor and tint.