It is currently Tue Aug 21, 2018 1:55 am

All times are UTC - 5 hours [ DST ]




Post new topic Reply to topic  [ 8 posts ] 
Author Message
PostPosted: Thu Feb 01, 2018 12:41 pm 
Offline
LE Member

Joined: Sun Jan 22, 2017 9:26 pm
Posts: 9
Year and Trim: 2005 Pontiac Bonneville GXP
Need to remove the driver door (damaged) and replace with a new(er) one. Where is the plug for the electrical harness to the driver door ? Inside the door or inside the "body"/chassis in front of the door opening ?

Trying to figure this out before I start pulling it all apart. Hoping that I can start taking off panels and such in the right direction. (The guy I bought the door from cut all the wires where the harness feeds into the chassis at the front of the door opening). If the connector is in the chassis/body work, then I will have to pull the harness out of the existing door and move it over. or spice a LOT of wires. Hoping the connector is inside the door.

Thanks in advance !


Top
 Profile  
 
PostPosted: Thu Feb 01, 2018 7:29 pm 
Offline
Certified Bonneville Nut
Certified Bonneville Nut
User avatar

Joined: Mon May 10, 2010 6:11 pm
Posts: 8925
Location: Chicago, IL
Year and Trim: 2003 SLE
Almost 100% sure the connector is inside the door, but it's been a while since I've gone inside mine.

_________________
-Car Guy Carl
"Penelope" - 2003 SLE - 176k Miles
"Sydney" - 2000 Honda S2000 - 55k miles
Image


Top
 Profile  
 
PostPosted: Thu Feb 01, 2018 7:48 pm 
Offline
SLE Member
SLE Member

Joined: Sat Oct 28, 2017 10:00 pm
Posts: 57
Year and Trim: 2003 Pontiac Bonneville SSEI
according to GMSI it's in the door, https://drive.google.com/open?id=1EhVpq ... 1TLKh5CPuP (says left door similar - doesn't show the left door in GMSI, but looks like you lucked out.

_________________
2003 Pontiac Bonneville SSEI
3.8L V6 SC, 180*T (Drilled),
GXP Tails, Interior Door handles, Trim pieces etc.
40th Aniv Grand Prix GTP Wheels (Very Shiny & Very Annoying :pukeleft: )
Image


Top
 Profile  
 
PostPosted: Thu Feb 01, 2018 8:48 pm 
Offline
LE Member

Joined: Sat Dec 30, 2017 6:16 pm
Posts: 8
Year and Trim: 2002 Park avenue
JEFFSSSEI wrote:
according to GMSI it's in the door, https://drive.google.com/open?id=1EhVpq ... 1TLKh5CPuP (says left door similar - doesn't show the left door in GMSI, but looks like you lucked out.


I know this isnt my thread, but thanks Jeff for the info on hard wiring my radar detector. I would have PM'ed you back but since im too new I guess im not aloud to send PMs yet.


Top
 Profile  
 
PostPosted: Thu Feb 01, 2018 11:02 pm 
Offline
SLE Member
SLE Member

Joined: Sat Oct 28, 2017 10:00 pm
Posts: 57
Year and Trim: 2003 Pontiac Bonneville SSEI
ParkAve666 wrote:
JEFFSSSEI wrote:
according to GMSI it's in the door, https://drive.google.com/open?id=1EhVpq ... 1TLKh5CPuP (says left door similar - doesn't show the left door in GMSI, but looks like you lucked out.


I know this isnt my thread, but thanks Jeff for the info on hard wiring my radar detector. I would have PM'ed you back but since im too new I guess im not aloud to send PMs yet.

Your most welcome.

_________________
2003 Pontiac Bonneville SSEI
3.8L V6 SC, 180*T (Drilled),
GXP Tails, Interior Door handles, Trim pieces etc.
40th Aniv Grand Prix GTP Wheels (Very Shiny & Very Annoying :pukeleft: )
Image


Top
 Profile  
 
PostPosted: Fri Feb 02, 2018 12:26 pm 
Offline
LE Member

Joined: Sun Jan 22, 2017 9:26 pm
Posts: 9
Year and Trim: 2005 Pontiac Bonneville GXP
Thank you !! That makes things much easier. :wink:


Top
 Profile  
 
PostPosted: Sun Feb 04, 2018 6:47 pm 
Offline
Resident Gearhead
Resident Gearhead

Joined: Wed Apr 01, 2009 7:11 pm
Posts: 2364
Location: Alberta, Canada
Year and Trim: 2004 GXP, 2008 STS, 2008 DTS
The connector for the front doors are inside the body for a 2005. The picture shown in the above post is actually a rear door but similar connections exist for the 2000 and perhaps 2001 front doors. For some reason they are different than later years which I suspect was to improve protection from the elements. To access the connector you need, you must remove the brake pedal assembly (or at least move it out of the way) and of course the LF sill plate. The connector you want is also a different style than shown in that diagram. Yours will be a Delphi Lever Lock 150/280 mixed style connector. It is the same connector as your driver's door trim panel (blue lever that you need to flip up to release). Oh yeah, you're going to find it to be a pain to access. Some people cut the heavy rubber sound barrier that the wiring passes through in the foot well to better access it. This isn't necessary, but can make it easier. If you do cut it, be VERY careful. The body shop that fixed my car after it was hit by a snow plow cut it. They also sliced open the sunroof drain hidden behind it! This was one factor in adding to interior water leaks.

_________________
Image

Bose Luxury Sound System w/Touch Screen Navigation, Addition of Factory XM, 2005 MY Antenna, OnStar Upgrade (3G),
RainSense Wipers, Backup Camera, '00 Style Door Panel Courtesy Lights, Heated Washer Solvent, 2X Remote Trunk Release,
Turn Signal Mirrors, Center Console Courtesy Lamp, Rear Outboard Heated Seats, PVD Chrome 18" Factory Rims, Upgraded
Carbon Fibre Appearance Interior Trim, Highly Modified Main Body Harness, Instrument Panel, Door, Door Panel & Headliner
Wiring Harnesses, Custom Fuse Box & Tire and Loading Information Decals, Additional Acoustic Insulation


Top
 Profile  
 
PostPosted: Mon Feb 05, 2018 11:01 am 
Offline
Resident Gearhead
Resident Gearhead

Joined: Wed Apr 01, 2009 7:11 pm
Posts: 2364
Location: Alberta, Canada
Year and Trim: 2004 GXP, 2008 STS, 2008 DTS
I don't know if you'll be able to see the photos or not (because they are hosted on photobucket), but this is a project I did a while ago. Many of the pictures show the area you need to access and the connector you're looking for.

post449450.html

_________________
Image

Bose Luxury Sound System w/Touch Screen Navigation, Addition of Factory XM, 2005 MY Antenna, OnStar Upgrade (3G),
RainSense Wipers, Backup Camera, '00 Style Door Panel Courtesy Lights, Heated Washer Solvent, 2X Remote Trunk Release,
Turn Signal Mirrors, Center Console Courtesy Lamp, Rear Outboard Heated Seats, PVD Chrome 18" Factory Rims, Upgraded
Carbon Fibre Appearance Interior Trim, Highly Modified Main Body Harness, Instrument Panel, Door, Door Panel & Headliner
Wiring Harnesses, Custom Fuse Box & Tire and Loading Information Decals, Additional Acoustic Insulation


Top
 Profile  
 
Display posts from previous:  Sort by  
Post new topic Reply to topic  [ 8 posts ] 

All times are UTC - 5 hours [ DST ]


Related topics
 Topics   Author   Replies   Views   Last post 
There are no new unread posts for this topic. Driver Door Latch

DTadlock99

4

235

Thu Feb 08, 2018 6:01 pm

dougtoth View the latest post

There are no new unread posts for this topic. How to convert 2001-2005 Bonneville to 2000 Door Light

SPLLOUDER

2

819

Thu May 09, 2013 4:02 pm

SPLLOUDER View the latest post

There are no new unread posts for this topic. Looking at buying a 2005 GXP vs 2005 SLE vs 2003 SSEi

[ Go to pageGo to page: 1, 2 ]

7tcatvert

33

4028

Sun Feb 19, 2012 2:07 am

1oldman View the latest post

There are no new unread posts for this topic. Wiring harness

Tricked-T

2

515

Mon May 04, 2009 4:45 pm

Tricked-T View the latest post

There are no new unread posts for this topic. Engine wiring harness

KnightBonne02

3

578

Sun Jan 04, 2015 1:02 pm

KnightBonne02 View the latest post

 


Who is online

Users browsing this forum: No registered users and 4 guests


You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot post attachments in this forum

Search for:
Jump to:  
Powered by phpBB® Forum Software © phpBB Group


phpBB SEO