It is currently Sat May 25, 2024 7:16 am

All times are UTC - 5 hours [ DST ]




Post new topic Reply to topic  [ 2 posts ] 
Author Message
PostPosted: Thu Jul 16, 2009 11:58 pm 
Offline
SLE Member
SLE Member

Joined: Thu May 22, 2008 1:14 pm
Posts: 89
Year and Trim: 2000 SSEi
2004 Camry
1969 Chevelle
I'm not sure if the hinges are the same as the Bonne's, but my drivers door sags a bit, and it doesn't seem like the hinges have play. I replaced the door check strap since it was noisy, but it didn't help.

So my question is... I assume the hinges can be adjusted, I just don't see any "slots" where I can loosen the bolts and move the door around. Is it done on the body end of the hinge, or the door end?

Thanks!


Top
 Profile  
 
PostPosted: Fri Jul 17, 2009 11:52 am 
Offline
Resident Gearhead
Resident Gearhead
User avatar

Joined: Mon May 19, 2008 10:30 pm
Posts: 8781
Location: Grand Rapids, Michigan
Year and Trim: 2014 Cadillac XTS Vsport.
This is what I have for instructions.

Position the door fore or aft at the body hinge pillar attachment. Perform the following steps as needed:

Loosen the fasteners.
Reposition the door.
Tighten the fasteners.
Tighten the fasteners to 34 N·m (25 lb ft).

Adjust the lock striker.
If more adjustment is needed, remove the door.
Remove the hinges from the pillar and the door.
Ream the stud holes in the pillar side of the hinges in order to allow for more adjustment.
Reinstall the hinges to the pillar and the door. Leave the nuts on the pillar side of the hinge loose.
Align the door as needed.
Position the door fore or aft at the body hinge pillar attachment. Perform the following steps as needed:

Loosen the fasteners.
Reposition the door.
Tighten the fasteners.

Tighten the fasteners to 34 N·m (25 lb ft).

_________________
*Gone, but not forgotten* - Black 2000 SSEi, HIR Headlights, Angel Eyes fogs, 3rd brake light overlay, hi-flo cat, 180 degree thermostat, HS 1.9 rockers, LSx yellow springs, Intense FWI, PCM, shift kit, push rods, and 3.4 Pulley. ZZP Power Log.


Top
 Profile  
 
Display posts from previous:  Sort by  
Post new topic Reply to topic  [ 2 posts ] 

All times are UTC - 5 hours [ DST ]


Related topics
 Topics   Author   Replies   Views   Last post 
There are no new unread posts for this topic. 2001 Park Avenue Security light

michaelbsc

18

9910

Tue Jan 05, 2010 9:10 pm

1fatcat View the latest post

There are no new unread posts for this topic. Where is the blower control module on 2001 Park Avenue?

michaelbsc

3

3678

Sat Jul 17, 2010 1:46 pm

white06lacrossecxs View the latest post

There are no new unread posts for this topic. Need Help with 2000 Park Avenue

Ponch 04

3

2316

Sun Jul 04, 2010 5:09 pm

Ponch 04 View the latest post

There are no new unread posts for this topic. Will a 96 park avenue subframe go into a 99 regal?

94SilverSSEi

7

2217

Thu May 27, 2010 6:36 pm

sandrock View the latest post

There are no new unread posts for this topic. 1996 Buick Park Avenue HELP-Engine

00ssei

9

3644

Wed Oct 08, 2008 2:01 pm

bill buttermore View the latest post

 


Who is online

Users browsing this forum: No registered users and 1 guest


You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot post attachments in this forum

Search for:
Jump to:  
Powered by phpBB® Forum Software © phpBB Group


phpBB SEO