I have a bulb out on the seat heater button.How does one replace it,does the whole console come out or can I take out just that little area where the buttons are.

Take out the little section where the switches are. The heated seat switch buttons are screwed into this plate. Unplug the wire, unscrew, and fix or replace.

To get the switch section out, you will have to remove the larger dash bezel, that goes over the radio, steering wheel, etc. Search the board here for Radio Repair or somesuch to find instructions.

Club member Harofreak00 will replace the bulb for a modest fee and mail it back to you, or you can disassemble the switch and do it yourself if you are good at soldering.

While you have this open, it is a good time to do some cleaning of the plate and areas you normally can't reach.

Ken_W

_________________
2000 SSEi "Gypssei" - 206k miles - Light Bronzemist Metallic - stock
1999 Grand Am GT - 168k miles - Red - stock DEAD -- transmission died
2004 Pontiac Montana Ext 2WD - 207k miles - Blue Black Metallic - stock

Thanks for the info I have not done any thing to it yet.Sounds like it's going to be fun.