PontiacBonnevilleClub.com
http://www.pontiacbonnevilleclub.com/forum/

97 ssei, evap switch vac lines
http://www.pontiacbonnevilleclub.com/forum/1992/topic12534.html		 Page 1 of 1
Author:  pmicaza [ Fri Jun 19, 2009 10:17 am ]
Post subject:  97 ssei, evap switch vac lines
hi,

i recent got a 97 ssei and decided to tune/freshen up all maintaince items fluids, plugs/wires filters, belts etc. while changing the plugs and wires i notice the evap switch has 3 vacuum elbows on it. one comes fromthe evap canister purge valve, one goes to the canister and the third one on the bottom of the evap switch does not have a line connected. the only other line i see in the area goes between just below the s/c nose and the map sensor(s) under the evap switch.

the third vac line is not on the diagram on the radiator support. i have spent a couple hours googling to no avail...

does anyone know where this third line goes to? i could back trace it if i knew.

tia,

peter
Author:  Echo SSEI [ Fri Jun 26, 2009 2:08 pm ]
Post subject:  Re: 97 ssei, evap switch vac lines
From everything I have researched, the third is not connected to anything. I thought the same thing.....there must be something that connects to it, but it doesn't, and I have confirmed this with several (at least 5) other '97 owners. Mine has a rubber elbow on it that just points toward the firewall.
Author:  sonoma_zr2 [ Fri Jun 26, 2009 2:24 pm ]
Post subject:  Re: 97 ssei, evap switch vac lines
confirmed on mine, bottom one has a rubber elbow to nothing, the one the points to firewall goes to canistor
Author:  pmicaza [ Fri Jun 26, 2009 7:24 pm ]
Post subject:  Re: 97 ssei, evap switch vac lines
thanks guys.

someone pointed out that in the pix i sent, the "port" in question was not barbed and it was probably a vent to the atmosphere...this deduction seemed reasonable. i appreciate your checking for me.

peter
Page 1 of 1 All times are UTC - 5 hours [ DST ]
Powered by phpBB® Forum Software © phpBB Group
http://www.phpbb.com/