PontiacBonnevilleClub.com
http://www.pontiacbonnevilleclub.com/forum/

Updated trans mount design - The Boat Roller Mount
http://www.pontiacbonnevilleclub.com/forum/2000-2005-other-than-gxp/topic44765-20.html
Page 2 of 4

Author:  Jrs3800 [ Wed Aug 19, 2015 1:08 pm ]
Post subject:  Re: Updated trans mount design - The Boat Roller Mount

Thanks Andrew... This worked exactly as described.. Couldn't be happier. :)

Author:  pfmeeks [ Sat Aug 22, 2015 8:34 pm ]
Post subject:  Re: Updated trans mount design - The Boat Roller Mount

Got mine in the mail today and installed it, worked perfect !!

Author:  harofreak00 [ Sat Oct 10, 2015 11:40 pm ]
Post subject:  Re: Updated trans mount design - The Boat Roller Mount

I'm still selling these, lots of order for them recently.

Author:  MikeKerr [ Mon Nov 09, 2015 11:33 pm ]
Post subject:  Re: Updated trans mount design - The Boat Roller Mount

I installed the boat mount from Andrew 60 days ago on my 2001 SSEi with 200k miles. Put 8k miles on the Bonneville since the boat mount, and am super happy with this solution. I installed a anchor motor mount prior and it failed weeks after the install.

This is the way to go if you are replacing your motor (trans) mount.

Author:  harofreak00 [ Thu Jan 07, 2016 12:33 pm ]
Post subject:  Re: Updated trans mount design - The Boat Roller Mount

Still selling these at a consistent rate. I've made and sold probably over 100 so far. I just got done making another HUGE batch.

I had to increase the price to $20 shipped from the original $16 shipped just to cover my costs a little better. My supplier ran out of stock and I had to get them elsewhere.

Attachments:
IMG_4578.JPG
IMG_4578.JPG [ 2.69 MiB | Viewed 2483 times ]

Author:  Jayblk16 [ Thu Feb 11, 2016 10:22 am ]
Post subject:  Re: Updated trans mount design - The Boat Roller Mount

harofreak00 wrote:
Still selling these at a consistent rate. I've made and sold probably over 100 so far. I just got done making another HUGE batch.

I had to increase the price to $20 shipped from the original $16 shipped just to cover my costs a little better. My supplier ran out of stock and I had to get them elsewhere.


How do I purchase

Author:  harofreak00 [ Thu Feb 11, 2016 2:01 pm ]
Post subject:  Re: Updated trans mount design - The Boat Roller Mount

Email me at andrew.suderman@gmail.com or send a PM on here.

Author:  jercon51 [ Tue Mar 08, 2016 3:35 pm ]
Post subject:  Re: Updated trans mount design - The Boat Roller Mount

Just got done installing mine today and what a difference. You certainly cant visually tell the old one is bad until you actually take it out. Glad I found this site. Thanks.

Author:  desertpierat [ Sun Mar 13, 2016 9:51 am ]
Post subject:  Re: Updated trans mount design - The Boat Roller Mount

harofreak00 wrote:
Top it off with the lock nut. Use a 2nd person or your extremely long arms to hold the bolt head on the bottom while you tighten the lock nut on the top. Tighten it enough that it starts to squeeze on the boat roller. Lower the jack and you are done.


So I did this, and after a few days I noticed that I can spin the bolt freely. Should I just tighten it down snug or do I need to jack the engine back up and start there again?

Author:  harofreak00 [ Sun Mar 13, 2016 10:03 pm ]
Post subject:  Re: Updated trans mount design - The Boat Roller Mount

Just snug it up. Tighten it enough that it compresses the boat roller about 1/4".

Author:  markpelly1 [ Thu Mar 31, 2016 8:56 pm ]
Post subject:  Re: Updated trans mount design - The Boat Roller Mount

I am having a hard time locating the mount. Where am I supposed to put this thing?

Author:  Benvw99 [ Thu Mar 31, 2016 10:13 pm ]
Post subject:  Re: Updated trans mount design - The Boat Roller Mount

I have the new mount on, so if you havent replaced yours it will look a little different. but it is in the same place nevertheless.


i circled it here:
Image

Author:  markpelly1 [ Fri Apr 01, 2016 9:10 am ]
Post subject:  Re: Updated trans mount design - The Boat Roller Mount

Awesome, thank you!

Author:  VaRunner [ Sat Jun 04, 2016 10:13 am ]
Post subject:  Re: Updated trans mount design - The Boat Roller Mount

Andrew,
Thanks for the quick shipment. I installed the mount last weekend and couldn't be happier with it so far.

Author:  tmenard8813 [ Sat Jul 09, 2016 10:28 am ]
Post subject:  Re: Updated trans mount design - The Boat Roller Mount

I just wanted to say I bought this from andrew.suderman and got it in 2 days. I installed this in a very short time and it is a perfect fit. Great job with this Andrew! Recommend this mod to anyone!

Author:  cvcman [ Thu Jul 21, 2016 4:07 pm ]
Post subject:  Re: Updated trans mount design - The Boat Roller Mount

will this work on a 2000 Lesabre ??? I just chgd mine yesterday

Author:  harofreak00 [ Fri Jul 22, 2016 9:29 am ]
Post subject:  Re: Updated trans mount design - The Boat Roller Mount

cvcman wrote:
will this work on a 2000 Lesabre ??? I just chgd mine yesterday


Yes

Author:  Simon75 [ Tue Aug 23, 2016 3:58 pm ]
Post subject:  Re: Updated trans mount design - The Boat Roller Mount

Hi,

I was curious how works broken mount and I put camera under hood :wink:
Tommorow I`ll replace it.


https://www.youtube.com/watch?v=gBTHHYu3zO4

Greetings from Poland!

Ps. Sorry for my english.

Author:  nos4blood70 [ Tue Aug 23, 2016 10:36 pm ]
Post subject:  Re: Updated trans mount design - The Boat Roller Mount

Wow, that is a lot of movement!

Author:  harofreak00 [ Wed Aug 24, 2016 12:21 am ]
Post subject:  Re: Updated trans mount design - The Boat Roller Mount

Excellent demonstration!

Page 2 of 4 All times are UTC - 5 hours [ DST ]
Powered by phpBB® Forum Software © phpBB Group
http://www.phpbb.com/