almost finished cai box (bottom of page) 56 k warning

[tpulliam79]

this pic is what was done down at the mini meet this month



and once I got home I went a little farther and so far from the road tests it stays alot cooler in there now :D



I left a spot non taped as to be able to open the lid if need be



Its completely enclosed for now and I added a little redneck cold air hose to help it stay cool




the hose runs up right behind the light just to give it a little extra air sometime in the future im going to build a rigid box but for now this seems to work..
what do you think?

[tpulliam79]

the insulation is reflectix from the depot with aluminum tape covering it, the tube isnt attatched to my box it just helps to get colder air into that area :D

so im thinking of taking the silver stuff out and replacing it with an acrylic box ( like on willwrens sleeper ) but im gonna coat it with wrinkle finish . just wondering if I should build it big enough for the reflectix to stay inside of it or if the coated acrylic (plexi) would keep it cool enough without it.. any suggestions? I gotta get this done before I go under the knife

[tpulliam79]

well had some time yesterday and this is what I did : first relocated my pcm then on to my new box( mind you this was all done with just my left hand and I'm right handed)
cut the acrylic ( heavy duty this time) and wrinkle finished it hinges too this was all done with a razorblade a very low powered dremmel and a cheap drill



starting the build



put hinges on the top for easy access used clips for the sides










now my wife is going to paint something on the top of the box, haven't decided what yet maybe the Pontiac dart or the cars name? ( which it still doesn't have one
)

[tpulliam79]

will is correct in saying 1-2 miles in optimum conditions... he happens to know quite a bit about these cars. and in my opinion his word is gold. and im sure its hard to tell for anyone with an intake as the acceleration is so much better its hard not to be into the gas